EasyManuals Logo

Denon AVR-X8500H User Manual

Denon AVR-X8500H
360 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #250 background imageLoading...
Page #250 background image
0
The wireless LAN (Wi-Fi) settings of this unit can also be configured from a PC or
tablet that supports wireless LAN connection.
1. Press and hold the DIMMER and STATUS buttons on the main unit for at least 3
seconds when the power of the unit is on.
2. Connect the wireless LAN of the PC or tablet used to “Denon AVR-X8500H”
when the message “Connect your Wi-Fi device to Wi-Fi network called “Denon
AVR-X8500H”” appears in the display.
3. Start up the browser and enter “192.168.1.16/Settings/” in the URL.
4. Use the browser to enter the settings, select “Connect” and then exit the
settings.
0
The Default key of this unit is fixed at “1”. Set Default key of the router to “1” to use.
Settings
Configure the IP address.
0
If you are using a broadband router (DHCP function), the information
required for network connection such as the IP address will be
automatically configured since the DHCP function is set to “On” in the
default settings of this unit.
0
Set up the IP Address, Subnet Mask, Default Gateway and DNS server
information only when assigning a fixed IP address or when connecting
to a network without DHCP function.
DHCP
-IP Address
-Subnet Mask
Save
Cancel
-Default Gateway
-DNS
Configures the network settings automatically or manually
Off
Network/Settings
000.000.000.000
000.000.000.000
000.000.000.000
000.000.000.000
Contents Connections Playback Settings Tips Appendix
250
Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-X8500H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X8500H and is the answer not in the manual?

Denon AVR-X8500H Specifications

General IconGeneral
Channels13.2
Power Output150W per channel (8 ohms, 20Hz-20kHz, 0.05% THD)
Frequency Response10Hz-100kHz (+1, -3dB)
HDMI Inputs8 (1 front)
HDMI Outputs3
Dolby AtmosYes
DTS:XYes
IMAX EnhancedYes
HEOS Multi-roomYes
Wi-FiYes
BluetoothYes
Voice ControlAmazon Alexa, Google Assistant, Apple Siri
Impedance4-16 ohms
HDR CompatibilityHDR10, Dolby Vision, HLG
Audio Return Channel (ARC)Yes
Digital Audio Inputs2 Optical, 2 Coaxial
Analog Audio Inputs6
Phono InputYes
Speaker ConnectorsBinding Posts
Supported Audio FormatsMP3, WMA, AAC, FLAC, ALAC, WAV, DSD
Surround Sound SupportDolby Atmos, DTS:X, Auro-3D
TunerAM/FM
Input Sensitivity/Impedance200 mV / 47 kohms
HDCP Support2.2
Other ConnectionsUSB, Ethernet, RS-232C
Wireless ConnectivityWi-Fi, Bluetooth
Signal-to-Noise Ratio102 dB
DACAKM AK4490EQ (32-bit/192kHz)
Total Harmonic Distortion0.05% (20Hz - 20kHz, 150W)

Related product manuals