EasyManuals Logo

Denon AVR-X1300W User Manual

Denon AVR-X1300W
275 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #229 background imageLoading...
Page #229 background image
o
The Internet radio cannot be played back
Symptom Cause / Solution Page
A list of broadcasting
stations is not displayed.
0
The LAN cable is not properly connected, or the network is disconnected. Check the connection status. 59
0
Perform the network diagnostic mode.
Internet Radio cannot be
played.
0
The selected radio station is broadcasting in a format that is not supported by this unit. Formats that can
be played back in this unit are MP3, WMA and AAC.
240
0
The firewall function is enabled on the router. Check the firewall setting.
0
The IP address is not properly set. 200
0
Check the power of the router is on.
0
To obtain the IP address automatically, enable the DHCP server function on the router. Also, set the
DHCP setting to “On” on this unit.
200
0
To obtain the IP address manually, set the IP address and proxy on this unit. 200
0
Some radio stations broadcast silently during some time period. In this case, no audio is output. Wait for a
while and select the same radio station, or select another radio station.
88
Cannot connect to favorite
radio stations.
0
Radio station is not currently in service. Register radio stations in service.
For some radio stations,
“Connection down” is
displayed and station
cannot be connected to.
0
The selected radio station is not in service. Select a radio station in service.
Contents Connections Playback Settings Tips Appendix
229
Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-X1300W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X1300W and is the answer not in the manual?

Denon AVR-X1300W Specifications

General IconGeneral
Display-
Product colorBlack
Audio decodersDSD, Dolby TrueHD
Audio amplifierYes
Multi-Zone quantity2
Apple docking compatibilityNot supported
Receiver typeSurround
Frequency range10 - 100000 Hz
Output impedance16 Ω
Input sensitivity200 mV
Audio output channels7.1 channels
Signal-to-Noise Ratio (SNR)98 dB
Power output per channel (20-20KHz@8 Ohm)145 W
Audio formats supportedAAC, AIFF, ALAC, FLAC, MP3, WAV, WMA
HDMI in6
Digital audio coaxial in0
Ethernet LAN (RJ-45) ports1
Supported video modes2160p
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.1 W
Power consumption (typical)430 W
AM band range522 - 1611 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Connectivity technologyWired
Speakers connectivity type3.5mm
Optical drive includedNo
Weight and Dimensions IconWeight and Dimensions
Depth339 mm
Width434 mm
Height215 mm
Weight8500 g

Related product manuals