Remote Monitoring Capability
In today’s custom install environment, it’s critical for integrators to provide quick, reliable assistance
and service to their clients, even after the install is complete. To support this effort, the Denon IN-
Command series AVR-X1600H AV receiver features “ihiji Invision”, “Domotz Pro” and “OvrC” remote
monitoring and management interface and service compatibility. These programs allow custom
integrators to monitor the status of connected products and troubleshoot remotely from the office or
on the go, radically reducing the time it takes to address the issue.
High-Resolution Audio Support
Enjoy superb audio fidelity with your favorite high-resolution audio tracks. The AVR-X1600H with AKM
32-bit D/A converters features high-resolution audio decoding with multiple lossless file types,
including ALAC, FLAC and WAV at up to 24-bit/196-kHz. It is also compatible with 2.8/5.6-MHz DSD files
(DSD is the audio coding format of SACD). Play them from memory devices, or over network sources.
The AVR-X1600H also supports other file types such as MP3 and WMA.
100+ Years of Firsts in Audio Technology
Founded in 1910, Denon has a deep heritage of “firsts” in audio technology — from Japan’s first audio
electronics manufacturer, to producing the world’s first commercial CD player and Dolby Atmos-
enabled AV receiver. This focused investment in audio R&D ensures you get the latest technology and
highest quality with every listening experience.
Technical Information
Number of Power Amps
7
Power Output
145W per Channel(6 ohms, 1 kHz, THD 1%, 1 ch)
120W per Channel(6 ohms, 1 kHz, 0.7%, 2 ch)
80W per Channel(8 ohms, 20 Hz – 20 kHz, 0.08%, 2 ch)
Speaker Impedance
4 – 16 Ω / ohms
Preamplifier Section
Input Sensitivity/Impedance 200 mV / 47kΩ/kohms
Frequency Response 10 Hz – 100 kHz — +1, –3 dB (Direct Mode)
S/N Ratio 98 dB (IHF–A Weighted, Direct Mode)
FM Section
To Next Page
Loading...
Need help?
General
Weight and Dimensions
