Denon AVR-X1800H - Page 196

Advanced
The following advanced speaker settings are available.
o
Low Frequency Effects
0
“Subwoofer Output” (v p. 196)
0
“Low Pass Filter” (v p. 197)
o
Front Speaker (v p. 198)
Subwoofer Output
Selects which low frequency signals are sent to the subwoofer outputs.
o
Subwoofer Output
LFE
(Default):
The subwoofer outputs receive the LFE
track, plus any redirected bass from
speakers with crossovers set. Use this
setting as the default for home theater
bass management in a typical room.
LFE + Main:
The subwoofer outputs receive the LFE
track, plus redirected bass, and a copy of
the low frequency signals from all full-
range speakers.
o
Bass Extraction LPF
Selects the low-pass filter point for the full-range speaker to copy the
low frequency signal to subwoofer.
40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz /
180 Hz / 200 Hz / 250 Hz (Default: 80 Hz)
Contents Connections Playback Settings Tips Appendix
196
Front panel Display Rear panel Remote Index