Denon AVR-X2600H User Manual

Calling up the settings
1
Press MAIN or ZONE2 to select the operating zone with
the remote control.
The button for the selected zone is lit.
2
Press QUICK SELECT.
The Quick Select settings registered to the button you pressed are
called up.
0
The default settings for the input source are as shown below.
GMAIN ZONEH
Button Input source
QUICK SELECT 1 CBL/SAT
QUICK SELECT 2 Blu-ray
QUICK SELECT 3 Media Player
QUICK SELECT 4 HEOS Music
GZONE2H
Button Input source
QUICK SELECT 1 CBL/SAT
QUICK SELECT 2 Blu-ray
QUICK SELECT 3 –
QUICK SELECT 4 HEOS Music
0
Volume is not registered to Quick Select Plus in the factory default settings.
See “Changing the settings” to register volume to Quick Select Plus. (v p. 133)
Contents Connections Playback Settings Tips Appendix
132
Front panel Display Rear panel Remote Index

Denon AVR-X2600H Specifications

General

Display	LCD
HDCP version	2.3
Product color	Black
Audio decoders	-
Volume control	Rotary
Audio amplifier	Yes
Amplifier output power	7 W
Audio formats supported	AAC, ALAC, FLAC, MP3, WAV, WMA
Supported radio bands	AM, FM
HDMI in	1
Certification	ISF
Power consumption (typical)	500 W
Receiver type	Surround
Audio output channels	- channels
Power output per channel (1KHz@6 Ohm)	125 W
Power output per channel (20-20KHz@8 Ohm)	95 W

Weight and Dimensions

Depth	237 mm
Width	434 mm
Height	341 mm
Weight	9500 g