Denon AVR-X2600H User Manual

13
Select “Details” and press ENTER to verify the
measurement results.
0
Subwoofers may measure a greater reported distance than the
actual distance due to added electrical delay common in
subwoofers.
NOTE
0
Do not change the speaker connection or subwoofer volume after Audyssey
®
Setup. If these are changed, run Audyssey
®
Setup again in order to configure the
optimum equalizer settings.
Contents
Connections Playback Settings Tips Appendix
184
Front panel Display Rear panel Remote Index

Denon AVR-X2600H Specifications

General

Display	LCD
HDCP version	2.3
Product color	Black
Audio decoders	-
Volume control	Rotary
Audio amplifier	Yes
Amplifier output power	7 W
Audio formats supported	AAC, ALAC, FLAC, MP3, WAV, WMA
Supported radio bands	AM, FM
HDMI in	1
Certification	ISF
Power consumption (typical)	500 W
Receiver type	Surround
Audio output channels	- channels
Power output per channel (1KHz@6 Ohm)	125 W
Power output per channel (20-20KHz@8 Ohm)	95 W

Weight and Dimensions

Depth	237 mm
Width	434 mm
Height	341 mm
Weight	9500 g