Denon AVR-X2600H User Manual

z1
This item can be selected when using any of the Surround Back, Front Height, Top Front, Top Middle, Front Dolby or Surround Dolby speaker.
z2
The default sound mode for the AirPlay playback is “Direct”.
z3
This can be selected when the Dolby Atmos signal contains the Dolby TrueHD signal.
z4
This can be selected when the Dolby Atmos signal contains the Dolby Digital Plus signal.
z5
This item can be selected when surround back speakers are used.
z6
This item cannot be selected when a DTS(-HD) format with a sampling frequency of over 48 kHz is input.
z7
This item cannot be selected when a DTS:X format with a sampling frequency of over 48 kHz is input.
z8
This item cannot be selected when the input signal is Dolby Digital, Dolby Digital Plus, Dolby TrueHD or Dolby Atmos.
z9
This item can be selected when the input signal is DTS-HD Master Audio.
z10
This item can be selected when the input signal is DTS-HD Hi Resolution.
z11
This item can be selected when the input signal is DTS 96/24.
z12
This item can be selected when the input signals contain surround back signals.
z13
This can be selected when the Dolby Atmos signal contains the Dolby TrueHD or Dolby Digital Plus signal.
Contents Connections Playback Settings Tips Appendix
260
Front panel Display Rear panel Remote Index

Denon AVR-X2600H Specifications

General

Display	LCD
HDCP version	2.3
Product color	Black
Audio decoders	-
Volume control	Rotary
Audio amplifier	Yes
Amplifier output power	7 W
Audio formats supported	AAC, ALAC, FLAC, MP3, WAV, WMA
Supported radio bands	AM, FM
HDMI in	1
Certification	ISF
Power consumption (typical)	500 W
Receiver type	Surround
Audio output channels	- channels
Power output per channel (1KHz@6 Ohm)	125 W
Power output per channel (20-20KHz@8 Ohm)	95 W

Weight and Dimensions

Depth	237 mm
Width	434 mm
Height	341 mm
Weight	9500 g