Denon AVR-X2600H User Manual

0
Analog
Input sensitivity: 200 mV
Frequency response: 10 Hz – 100 kHz — +1, –3 dB (Direct mode)
S/N: 100 dB (IHF–A weighted, Direct mode)
0
Phono equalizer
Input sensitivity: 2.5 mV
RIAA deviation: ±1 dB (20 Hz to 20 kHz)
S/N: 74 dB (IHF-A)
Distortion factor: 0.03 % (1 kHz, 3 V)
o
Video section
0
Standard video connectors
Input/output level and impedance: 1 Vp-p, 75 Ω/ohms
Frequency response: 5 Hz – 10 MHz — 0, –3 dB
0
Color component video connector
Input/output level and impedance: Y signal — 1 Vp-p, 75 Ω/ohms
P
B
/ C
B
signal — 0.7 Vp-p, 75 Ω/ohms
P
R
/ C
R
signal — 0.7 Vp-p, 75 Ω/ohms
Frequency response: 5 Hz – 60 MHz — 0, –3 dB
Contents Connections Playback Settings Tips Appendix
273
Front panel Display Rear panel Remote Index

Denon AVR-X2600H Specifications

General

Display	LCD
HDCP version	2.3
Product color	Black
Audio decoders	-
Volume control	Rotary
Audio amplifier	Yes
Amplifier output power	7 W
Audio formats supported	AAC, ALAC, FLAC, MP3, WAV, WMA
Supported radio bands	AM, FM
HDMI in	1
Certification	ISF
Power consumption (typical)	500 W
Receiver type	Surround
Audio output channels	- channels
Power output per channel (1KHz@6 Ohm)	125 W
Power output per channel (20-20KHz@8 Ohm)	95 W

Weight and Dimensions

Depth	237 mm
Width	434 mm
Height	341 mm
Weight	9500 g