Denon AVR-X2800H User Manual

Suppressing the dynamic range (DRC)
Compress dynamic range (difference between loud and soft sounds).
1
Press OPTION during DAB reception.
The option menu screen is displayed.
2
Use cursor Up/Down to select “DRC”, then press
ENTER.
3
Use cursor Left/Right to select the compression level.
1 / 1/2 / Off (Default: 1)
Resetting the DAB settings (DAB
Initialize)
When the “DAB Initialize” procedure is performed, all of DAB settings are
reset.
1
Press OPTION during DAB reception.
The option menu screen is displayed.
2
Use cursor Up/Down to select “DAB Initialize”, then
press ENTER.
3
Use cursor Left/Right to select “Reset”, then press
ENTER.
All of DAB settings are reset to the factory default values.
0
After “DAB Initialize” is completed, the Auto Scan function starts automatically and
creates a list of services.
Contents Connections Playback Settings Tips Appendix
101
Front panel Display Rear panel Remote Index

Denon AVR-X2800H Specifications

General

Receiver type	stereo
Audio output channels	7.1 channels
Power output per channel (1KHz@6 Ohm)	185 W
Power output per channel (20-20KHz@8 Ohm)	95 W
Display	LED
Apple docking	No
Product color	Black
Audio decoders	DTS Virtual:X, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Surround, Dolby TrueHD
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	500 W
Operating temperature (T-T)	5 - 35 °C
Bluetooth version	4.2
Bluetooth profiles	A2DP, AVRCP, SBC
FM band range	87.5 - 108 MHz
Supported radio bands	DAB, FM, MW
Internet radio services supported	-
HDMI in	6
Digital audio coaxial in	1
Digital audio optical in	2
Speakers connectivity type	Clamp terminals

Weight and Dimensions

Depth	341 mm
Width	434 mm
Height	237 mm
Weight	9500 g