EasyManuals Logo

Denon AVR-X2800H User Manual

Denon AVR-X2800H
302 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #246 background imageLoading...
Page #246 background image
No sound comes out
No sound comes out of speakers.
0
Check the connections for all devices. (v p. 34)
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Check that speaker cables are properly connected. Check that cable core wires come in contact with the metal part on speaker terminals. (v p. 34)
0
Securely tighten the speaker terminals. Check speaker terminals for looseness. (v p. 34)
0
Check that a proper input source is selected. (v p. 67)
0
Adjust the volume. (v p. 68)
0
Cancel the mute mode. (v p. 68)
0
Check the digital audio input connector setting. (v p. 191)
0
Check the digital audio output setting on the connected device. On some devices, the digital audio output is set to off by default.
0
When a headphone is plugged into the PHONES jack on the main unit, sound is not output from the speaker terminal and PRE OUT connector.
0
Audio is output to your Bluetooth headphones, but not to speakers or pre-outs when “Output Mode” set to “Bluetooth Only”. Change “Output Mode” to
“Bluetooth + Speakers” to output audio from your Bluetooth headphones as well as your speakers or pre-outs. (v p. 229)
No sound comes out when using the DVI-D connection.
0
When this unit is connected to a device equipped with a DVI-D connector, no sound is output. Make a separate audio connection.
Contents
Connections Playback Settings Tips Appendix
246
Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-X2800H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X2800H and is the answer not in the manual?

Denon AVR-X2800H Specifications

General IconGeneral
Receiver typestereo
Audio output channels7.1 channels
Power output per channel (1KHz@6 Ohm)185 W
Power output per channel (20-20KHz@8 Ohm)95 W
DisplayLED
Apple dockingNo
Product colorBlack
Audio decodersDTS Virtual:X, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Surround, Dolby TrueHD
AC input voltage230 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.5 W
Power consumption (typical)500 W
Operating temperature (T-T)5 - 35 °C
Bluetooth version4.2
Bluetooth profilesA2DP, AVRCP, SBC
FM band range87.5 - 108 MHz
Supported radio bandsDAB, FM, MW
Internet radio services supported-
HDMI in6
Digital audio coaxial in1
Digital audio optical in2
Speakers connectivity typeClamp terminals
Weight and Dimensions IconWeight and Dimensions
Depth341 mm
Width434 mm
Height237 mm
Weight9500 g

Related product manuals