EasyManuals Logo

Denon AVR-X2800H User Manual

Denon AVR-X2800H
302 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #249 background imageLoading...
Page #249 background image
Audyssey MultEQ
®
XT, Audyssey Dynamic EQ
®
and Audyssey Dynamic Volume
®
cannot be selected.
0
These cannot be selected when you have not performed Audyssey
®
Setup. (v p. 195)
0
Switch to a sound mode other than “Direct” or “Pure Direct”. (v p. 137)
0
These cannot be selected when sound mode is “DTS Virtual:X” or sound mode that have “+Virtual:X” in the sound mode name.
0
These cannot be selected when using the headphones.
“Restorer” cannot be selected.
0
Check that an analog signal or PCM signal (Sample Rate = 44.1/48 kHz) is input. For playback of multichannel signals such as Dolby Digital or DTS
surround, “Restorer” cannot be used. (v p. 175)
0
Switch to a sound mode other than “Direct” or “Pure Direct”. (v p. 137)
No sound is output when using ZONE2.
0
Digital signal audio input from the HDMI connector or digital audio connectors (OPTICAL) cannot be played back. Use analog connections.
0
When listening to audio from a Bluetooth device in ZONE2, remove any obstructions between the Bluetooth device and this unit and use it within a
range of about 30 m.
Sound mode settings are not available when using Bluetooth headphones. Audio menu settings are also not available.
0
This unit cannot change sound mode or audio menu settings for audio output to Bluetooth headphones.
Contents
Connections Playback Settings Tips Appendix
249
Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-X2800H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X2800H and is the answer not in the manual?

Denon AVR-X2800H Specifications

General IconGeneral
Receiver typestereo
Audio output channels7.1 channels
Power output per channel (1KHz@6 Ohm)185 W
Power output per channel (20-20KHz@8 Ohm)95 W
DisplayLED
Apple dockingNo
Product colorBlack
Audio decodersDTS Virtual:X, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Surround, Dolby TrueHD
AC input voltage230 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.5 W
Power consumption (typical)500 W
Operating temperature (T-T)5 - 35 °C
Bluetooth version4.2
Bluetooth profilesA2DP, AVRCP, SBC
FM band range87.5 - 108 MHz
Supported radio bandsDAB, FM, MW
Internet radio services supported-
HDMI in6
Digital audio coaxial in1
Digital audio optical in2
Speakers connectivity typeClamp terminals
Weight and Dimensions IconWeight and Dimensions
Depth341 mm
Width434 mm
Height237 mm
Weight9500 g

Related product manuals