EasyManuals Logo

Denon AVR-X2800H User Manual

Denon AVR-X2800H
302 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #260 background imageLoading...
Page #260 background image
Cannot connect to a wireless LAN network
Cannot connect to the network.
0
The network name (SSID), password and encryption setting have not been set up correctly. Configure the network settings according to the setting
details of this unit. (v p. 218)
0
Shorten the distance from the wireless LAN access point and remove any obstructions to improve access first before re-connecting again. Place the
unit away from microwave ovens and other network access points.
0
Configure the access point channel settings away from channels that are being used by other networks.
0
This unit is not compatible with WEP (TSN).
Cannot connect to a WPS Router.
0
Check that the WPS mode of the router is operating.
0
Press the WPS button on the router and then press the “Connect” button displayed on the TV within 2 minutes.
0
A router/settings that are compatible with WPS 2.0 standards are required. Set the encryption type to “None”, “WPA-PSK (AES)” or WPA2-PSK (AES).
(v p. 218)
0
If the router encryption method is WEP/WPA-TKIP/WPA2-TKIP, you cannot connect by using the WPS button on the router. In this case, use the “Scan
Networks” or “Manual” method to connect.
Cannot connect to the network using iPhone/iPod touch/iPad.
0
Update the iPhone/iPod touch/iPad firmware to the latest version.
0
When configuring the settings via a wireless connection, iOS 10.0.2 or later needs to be supported.
Contents
Connections Playback Settings Tips Appendix
260
Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-X2800H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X2800H and is the answer not in the manual?

Denon AVR-X2800H Specifications

General IconGeneral
Receiver typestereo
Audio output channels7.1 channels
Power output per channel (1KHz@6 Ohm)185 W
Power output per channel (20-20KHz@8 Ohm)95 W
DisplayLED
Apple dockingNo
Product colorBlack
Audio decodersDTS Virtual:X, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Surround, Dolby TrueHD
AC input voltage230 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.5 W
Power consumption (typical)500 W
Operating temperature (T-T)5 - 35 °C
Bluetooth version4.2
Bluetooth profilesA2DP, AVRCP, SBC
FM band range87.5 - 108 MHz
Supported radio bandsDAB, FM, MW
Internet radio services supported-
HDMI in6
Digital audio coaxial in1
Digital audio optical in2
Speakers connectivity typeClamp terminals
Weight and Dimensions IconWeight and Dimensions
Depth341 mm
Width434 mm
Height237 mm
Weight9500 g

Related product manuals