Denon AVR-X2800H User Manual

Listening to FM/DAB broadcasts (for FM/DAB model only)
CH/PAGE
BACK
OPTION
TUNE +, –
TUNER
df
ENTER
Cursor Up/Down/
Left/Right
You can use the built-in tuner of this unit to listen to FM broadcasts and
DAB broadcasts.
Make sure the DAB/FM antenna is connected to this unit first.
n
About DAB+
0
The main difference between DAB and DAB+ is the type of audio codec
used.
DAB: MPEG2
DAB+: MPEG4 (AAC)
0
This unit can receive both DAB and DAB+ broadcasts.
Contents Connections Playback Settings Tips Appendix
91
Front panel Display Rear panel Remote Index

Denon AVR-X2800H Specifications

General

Receiver type	stereo
Audio output channels	7.1 channels
Power output per channel (1KHz@6 Ohm)	185 W
Power output per channel (20-20KHz@8 Ohm)	95 W
Display	LED
Apple docking	No
Product color	Black
Audio decoders	DTS Virtual:X, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Surround, Dolby TrueHD
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	500 W
Operating temperature (T-T)	5 - 35 °C
Bluetooth version	4.2
Bluetooth profiles	A2DP, AVRCP, SBC
FM band range	87.5 - 108 MHz
Supported radio bands	DAB, FM, MW
Internet radio services supported	-
HDMI in	6
Digital audio coaxial in	1
Digital audio optical in	2
Speakers connectivity type	Clamp terminals

Weight and Dimensions

Depth	341 mm
Width	434 mm
Height	237 mm
Weight	9500 g