Denon AVR-X3300W Manual

 FM/AM antenna terminals (ANTENNA)
Used to connect FM antennas and AM loop antennas.
 Analog audio connectors (AUDIO)
Used to connect devices equipped with analog audio connectors.
• “Connecting a set-top box (Satellite tuner/cable TV)”
• “Connecting a DVD player or Blu-ray Disc player”
 Speaker terminals (SPEAKERS)
Used to connect speakers.
 PRE OUT connectors
Used to connect a subwoofer with built-in amplifier or an external power amplifier.
• “Connecting the subwoofer”
• “Connection 3 : Connection using an external amplifier”
 Component video connectors (COMPONENT VIDEO)
Used to connect devices equipped with component video connectors.
• “Connection 3 : TV equipped without an HDMI connector”
• “Connecting a set-top box (Satellite tuner/cable TV)”
• “Connecting a DVD player or Blu-ray Disc player”
NOTE
Do not touch the inner pins of the connectors on the rear panel. Electrostatic
discharge may cause permanent damage to the unit.
HOME
REMOTE CONTROL 1REAR PANEL 2
Rear Panel (3 of 3)

Denon AVR-X3300W Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Pre-out channels	7.2
Pre-out connectivity	Yes
Audio output channels	7.2 channels
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.05 %
Power output per channel (1KHz@6 Ohm)	180 W
Power output per channel (20-20KHz@8 Ohm)	105 W
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	600 W
Product color	Black
Audio decoders	DTS-HD, DTS-HD Master Audio, Dolby TrueHD
Multi-Zone quantity	2
Apple docking compatibility	-
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
HDMI in	8
Audio (L/R) in	5
Remote control in	1
Composite video in	3
Composite video out	0
Connectivity technology	Wired
Speakers connectivity type	Clamp terminals
Audio formats supported	AAC, AIFF, ALAC, DSD, FLAC, MP3, WAV, WMA

Weight and Dimensions

Depth	389 mm
Width	434 mm
Height	167 mm
Weight	10800 g