EasyManuals Logo

Denon AVR-X3600H User Manual

Denon AVR-X3600H
310 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #286 background imageLoading...
Page #286 background image
z1
During playback in Pure Direct mode, the surround parameters are the same as in Direct mode.
z2
This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD or Dolby Atmos signal is played.
z3
This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS:X or DTS signal is played.
z4
This item can be selected when a DTS:X signal that is compatible with the Dialog Control function is input.
z5
This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z6
This feature will be supported via firmware update.
z7
This item can be selected the sound mode that have “+ Dolby Surround” in the sound mode name.
z8 This item can be selected when “IMAX Audio Settings” in the menu is set to “Manual”. (v p. 168)
z9
This item can be selected when Height, Ceiling or Dolby Atmos Enabled speakers are used.
z10 This item cannot be set when “Dynamic EQ” is set to “On”. (v p. 175)
z11 This item cannot be set when “Center” is set to “None”. (v p. 215)
z12 This item cannot be set when “Subwoofer” in the menu is set to “None”. (v p. 215)
z13
This item cannot be set when Audyssey
®
Setup (Speaker Calibration) has not been performed.
z14
This item cannot be selected when a DTS:X format with a sampling frequency of over 48 kHz is input.
z15
This item cannot be set when sound mode is “DTS Virtual:X” or sound mode that have “+Virtual:X” in the sound mode name.
z16
This item cannot be set when “MultEQ
®
XT32” is set to “Off”. (v p. 174)
z17
This item cannot be set when sound mode is “IMAX DTS:X” or “IMAX DTS”.
z18
This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z19 This setting is available when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v p. 222)
z20 This item can be set when “Front” is set to “Small” or “Subwoofer Mode” is set to “LFE+Main”. (v p. 214, 222)
Contents
Connections Playback Settings Tips Appendix
286
Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-X3600H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X3600H and is the answer not in the manual?

Denon AVR-X3600H Specifications

General IconGeneral
Receiver typeSurround
Frequency range20 - 20000 Hz
Pre-out channels11.2
Pre-out connectivityYes
Audio output channels9.2 channels
Dynamic power per channel (6 Ohm)180 W
Power output per channel (20-20KHz@8 Ohm)105 W
Display-
HDCP version2.2
Apple dockingNo
Product colorBlack
Audio decodersDTS-HD Master Audio, Dolby Atmos, Dolby Surround, Dolby TrueHD
Audio formats supportedAAC, ALAC, FLAC, MP3, WAV, WMA
Supported radio bandsAM, FM
Internet radio services supportedAmazon Music, Deezer, Pandora, Spotify, Tidal, TuneIn
HDMI in8
Composite video in3
Ethernet LAN (RJ-45) ports1
Component video (YPbPr/YCbCr) in2
Supported video modes480i, 576i
Power consumption (standby)0.1 W
Power consumption (typical)600 W
Package weight14600 g
Cables includedAC
Speakers connectivity typeBinding post
Weight and Dimensions IconWeight and Dimensions
Depth379 mm
Width434 mm
Height167 mm
Weight12100 g

Related product manuals