EasyManuals Logo

Denon AVR-X3700H User Manual

Denon AVR-X3700H
313 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #192 background imageLoading...
Page #192 background image
Output Settings
Makes settings for video output.
0
This can be set when “HDMI” is assigned for each input source. (v p. 201)
0
“Resolution”, “Sharpness”, “Progressive Mode” and “Aspect Ratio” can be set
when “i/p Scaler” is set to “On”. (“Resolution” (v p. 194),
“Sharpness” (v p. 194), “Progressive Mode” (v p. 195), “Aspect
Ratio” (v p. 195))
0
“Output Settings” cannot be set when 4K or 8K signals are input.
0
“Video Mode”, “i/p Scaler”, “Resolution”, “Sharpness”, “Progressive Mode” and
“Aspect Ratio” cannot be set when sound mode is set to “IMAX DTS” or “IMAX
DTS:X”. (“Video Mode” (v p. 193), “i/p Scaler” (v p. 193),
“Resolution” (v p. 194), “Sharpness” (v p. 194), “Progressive
Mode” (v p. 195), “Aspect Ratio” (v p. 195))
0
“Video Mode”, “i/p Scaler”, “Resolution”, “Sharpness”, “Progressive Mode” and
“Aspect Ratio” settings are stored for each input source. (“Video
Mode” (v p. 193), “i/p Scaler” (v p. 193), “Resolution” (v p. 194),
“Sharpness” (v p. 194), “Progressive Mode” (v p. 195), “Aspect
Ratio” (v p. 195))
o
HDMI Video Output
Select the HDMI monitor connector to be used.
Auto(Dual)
(Default):
The presence of a TV connected to the
HDMI MONITOR 1 or HDMI MONITOR 2
connector is detected automatically, and
that TV connection is used.
Monitor 1:
A TV connected to the HDMI MONITOR
1 connector is always used.
Monitor 2:
A TV connected to the HDMI MONITOR
2 connector is always used.
0
If both the HDMI MONITOR 1 and HDMI MONITOR 2 connectors are
connected and “Resolution” is set to “Auto”, the signals are output with a
resolution that is compatible with both TVs. (v p. 194)
When the “Resolution” setting in the menu is not set to “Auto”, set the
resolution in “Video” - “HDMI Monitor 1” and “HDMI Monitor 2” to one that is
compatible with both TVs. (v p. 251)
0
You can check which resolutions are compatible with your TV in “HDMI
Monitor 1” and “HDMI Monitor 2”. (v p. 251)
0
When connecting multiple Dolby Vision TVs, the signal will only be optimal for
one TV. A TV connected to the HDMI MONITOR 1 connector has priority.
Contents Connections Playback Settings Tips Appendix
192
Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-X3700H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X3700H and is the answer not in the manual?

Denon AVR-X3700H Specifications

General IconGeneral
Channels9.2
HDMI Outputs3
Dolby AtmosYes
DTS:XYes
IMAX EnhancedYes
4K/120Hz Pass-throughYes
8K/60Hz Pass-throughYes
Wi-FiYes
BluetoothYes
HEOS Built-inYes
Impedance4 - 16 ohms
Frequency Response10 Hz - 100 kHz
Input Sensitivity200 mV
HDCP Support2.3
HDR CompatibilityHDR10, HDR10+, Dolby Vision, HLG
Audio Return Channel (ARC)eARC
Phono InputYes
EthernetYes
USBYes
AM/FM TunerYes
Power Output per Channel105W (8 ohms, 20 Hz - 20 kHz, THD 0.08%, 2ch driven)
Signal-to-Noise Ratio100 dB
Video UpscalingYes, up to 8K
Dimensions (W x H x D)434 x 167 x 389 mm
Weight12.5 kg

Related product manuals