Name: Denon AVR-X3700H
Brand: Denon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Move the Sound calibration microphone to position 2,

select “Continue”, then press ENTER.

The measurement of the second position starts.

Measurements can be made in up to eight positions.

Continue

Place the microphone ear level of the listener seated at the 2nd

listening position, which should be no more than 2 ft (60 cm)

away from the 1st position, then select “Continue”...

Audyssey Setup

Back

Ear Height

Stopping Audyssey

Setup

Press BACK to display the popup screen.

Press o to select “Yes”, then press ENTER.

Repeat step 8, measuring positions 3 to 8.

To skip measuring the fourth and subsequent listening position, press o to

select “Complete” and press ENTER to proceed to step 11.

Select “Continue”, then press ENTER.

Audyssey Setup

Continue

Repeat Last Test

Measurements complete.

Select “Continue” to analyze the data...

Start the analysis and storage of the measurement results.

Analysis takes several minutes to complete.

The more speakers and measurement positions that there are,

the more time it takes to perform the analysis.

NOTE

When the measurement results are being saved, make sure the power is

not turned off.

Contents Connections Playback Settings Tips Appendix

209

Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-X3700H

Questions and Answers:

Need help?

Do you have a question about the Denon AVR-X3700H and is the answer not in the manual?

General