Denon AVR-X3800H User Manual

o
Subwoofer Mode
When you are using multiple subwoofers, set the audio to be output
from the subwoofer.
Standard
(Default):
All subwoofers output LFE signals and
bass below the crossover frequency of all
the speakers.
Directional:
All subwoofers output LFE signals. In
addition, each subwoofer outputs bass
below the crossover frequency of
speakers that are placed near them.
0
This can be set when “Subwoofer” is set to “4 spkrs”, “3 spkrs” or “2 spkrs”.
o
Subwoofer Layout
When you are using multiple subwoofers, configure the subwoofer
layout. The layouts that can be selected differ depending on the
configuration of “Subwoofer Mode”.
[When “Subwoofer” is set to “2 spkrs”]
Left/Right
(Default):
Place subwoofers symmetrically on the
front side.
Front/Rear:
Place a subwoofer in the middle of the
front side and another in the middle of the
rear side.
[When “Subwoofer” is set to “3 spkrs”]
FL/FR/Rear:
Place subwoofers symmetrically on the
front side and one in the middle of the
rear side.
[When “Subwoofer” is set to “4 spkrs”]
FL/FR/RL/RR:
Place the subwoofers in the four corners
of the room.
Contents Connections Playback Settings Tips Appendix
215
Front panel Display Rear panel Remote Index

Denon AVR-X3800H Specifications

General

Channels	9.4
HDMI Outputs	3
Dolby Atmos	Yes
DTS:X	Yes
Wi-Fi	Yes
Bluetooth	Yes
HEOS Multi-room	Yes
Voice Control	Yes (Amazon Alexa, Google Assistant, Apple Siri)
eARC	Yes
Input Sensitivity/Impedance	200 mV / 47 kohms
Ethernet	Yes
Phono Input	Yes
AM/FM Tuner	Yes
Audyssey Room Correction	Audyssey MultEQ XT32
HDR Compatibility	HDR10+, Dolby Vision, HLG
Streaming	Spotify, Tidal
Frequency Response	10 Hz - 100 kHz (+1, -3 dB)
USB Port	Yes
Signal-to-Noise Ratio	100 dB (IHF-A weighted, Direct mode)