Denon AVR-X3800H User Manual

o
Back Dolby
Set the presence and size of the back Dolby speakers.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when the back Dolby speakers are
not connected.
0
When speakers for which you assigned Height1 in “Amp Assign” are set to
“None”, “None” is automatically set for Height2.
o
Center Height
Set the presence and size of the center height speaker.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when the center height speaker is
not connected.
0
When “Surround Height” or “Rear Height” is set to “None”, “Center Height” is
automatically set to “None”.
0
When “Center” is set to “None”, “Center Height” is automatically set to “None”.
Contents
Connections Playback Settings Tips Appendix
221
Front panel Display Rear panel Remote Index

Denon AVR-X3800H Specifications

General

Channels	9.4
HDMI Outputs	3
Dolby Atmos	Yes
DTS:X	Yes
Wi-Fi	Yes
Bluetooth	Yes
HEOS Multi-room	Yes
Voice Control	Yes (Amazon Alexa, Google Assistant, Apple Siri)
eARC	Yes
Input Sensitivity/Impedance	200 mV / 47 kohms
Ethernet	Yes
Phono Input	Yes
AM/FM Tuner	Yes
Audyssey Room Correction	Audyssey MultEQ XT32
HDR Compatibility	HDR10+, Dolby Vision, HLG
Streaming	Spotify, Tidal
Frequency Response	10 Hz - 100 kHz (+1, -3 dB)
USB Port	Yes
Signal-to-Noise Ratio	100 dB (IHF-A weighted, Direct mode)