EasyManuals Logo

Denon AVR-X4800H User Manual

Denon AVR-X4800H
339 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #219 background imageLoading...
Page #219 background image
8
Move the Sound calibration microphone to position 2,
select “Continue”, then press ENTER.
The measurement of the second position starts.
Measurements can be made in up to eight positions.
.
Continue
Place the microphone ear level of the listener seated at the
2nd listening position, which should be no more than 60 cm
away from the 1st position, then select “Continue”...
Audyssey Setup
Back
Ear Height
n
Stopping Audyssey
®
Setup
A
Press BACK to display the popup screen.
B
Press o to select “Yes”, then press ENTER.
9
Repeat step 8, measuring positions 3 to 8.
0
To skip measuring the fourth and subsequent listening position, press o to
select “Complete” and press ENTER to proceed to step 11.
10
Select “Continue”, then press ENTER.
.
Audyssey Setup
Continue
Repeat Last Test
Measurements complete.
Select “Continue” to analyze the data...
Start the analysis and storage of the measurement results.
0
Analysis takes several minutes to complete.
The more speakers and measurement positions that there are,
the more time it takes to perform the analysis.
NOTE
0
When the measurement results are being saved, make sure the power is
not turned off.
Contents Connections Playback Settings Tips Appendix
219
Front panel Display Rear panel Remote Index

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X4800H and is the answer not in the manual?

Denon AVR-X4800H Specifications

General IconGeneral
Channels9.4
Dolby AtmosYes
DTS:XYes
HDMI Inputs7
HDMI Outputs3
4K/120Hz Pass-throughYes
8K SupportYes
Wi-FiYes (2.4GHz/5GHz)
BluetoothYes
HEOS Built-inYes
Amplifier Channels9
Power Output per Channel @ 8 Ohms / 1 kHz / 0.08% THD / 2 Channels Driven125W
Speaker Impedance4-16 Ohms
Auro 3DYes
IMAX EnhancedYes
HDCP Support2.3
HDR CompatibilityHDR10, HDR10+, Dolby Vision, HLG
eARC SupportYes
Phono InputYes
EthernetYes
Voice Assistant SupportAmazon Alexa, Google Assistant, Apple Siri
Audyssey MultEQ XT32Yes
Total Harmonic Distortion0.05%
Input Sensitivity/Impedance200 mV / 47 kOhms
Network ConnectivityEthernet, Wi-Fi
Supported Audio FormatsMP3, WMA, AAC, FLAC, ALAC, WAV, DSD
Dimensions (W x H x D)434 x 167 x 389 mm
Weight13.5 kg
Power Output per Channel125W
Voice ControlYes
Frequency Response10 Hz - 100 kHz
DAC32-bit AKM
Video Pass-Through8K
Zone Audio OutputZone 2, Zone 3
Wireless Audio StreamingYes
Signal-to-Noise Ratio102 dB
Video Inputs/Outputs7/3 (HDMI)
Audio Inputs/Outputs7 HDMI inputs, 3 HDMI outputs, 1 phono input, 2 optical inputs, 1 coaxial input

Related product manuals