Denon D-60 - Page 21

Press the receiver's POWER
ON/STANDBY button to
turn the power on.
Example: Waking up to the music of a compact disc
POWER
ON/STANDBY
Press the CD player's
OPEN/CLOSE button to
open the disc tray.
Load the CD in the disc
tray.
Refer to Page 13.
OPEN/CLOSE
Press the receiver's POWER
ON/STANDBY button to
turn the power on.
Press the cassette deck's
OPEN/CLOSE button to
open the tray.
fe]
Load the cassette tape
in the tray.
Refer to Page 17.
Press the CO ptayer’s
OPEN/CLOSE button again
to close the disc tray.
Press the receiver's TIMER
buttons.
Use the receiver's UP and
DOWN buttons to display
“cb”.
——
OPEN/CLOSE
TUNING
Follow steps 6 to 16 under “Setting the Timer” on Page 20.
Operations marked[R]can also be performed using the remote control unit.
Press the cassette deck’s
OPEN/CLOSE button again
to close the tray.
Press the receiver's TIMER
buttons.
Use the receiver's UP and
DOWN buttons to display
“TAPE”.
Example: Waking up to the music of a cassette tape
POWER
ON/STANDBY,
Foliow steps 6 to 16 under “Setting the Timer” on Page 20.
The tape will be played in the direction indicated by the tape direction indicators.
Chack that the tape direction and reverse mode settings are as desired.
(Refer to “Using the Auto Reverse Function” on Page 18.}
@ When using the timer, the tape is played in direction indicated for Deck 2.
Operations marked({R]can also be performed using the remote control unit.
ENGLISH
21