Denon DHT-S716H - Page 31

DISASSEMBLY
Flowchart
• Remove each part following the ow below.
• Reassemble the removed parts in the reverse order.
• Read "SAFETY PRECAUTIONS" before reassembling the removed parts.
• If wire bundles are removed or moved during adjustment or part replacement, reshape the wires after completing the work. Failure to shape the wires correctly may cause problems such as noise.
• See "EXPLODED VIEW"
MAIN PCB
DISASSEMBLY
5. MAIN PCB
and "EXPLODED VIEW"
Rear Plate
Ref. No. of EXPLODED VIEW : 43
Seal Cover Rear
Ref. No. of EXPLODED VIEW : 35
MAIN PCB
Ref. No. of EXPLODED VIEW : 34
STATUS LED PCB
DISASSEMBLY
8. STATUS LED PCB
and "EXPLODED VIEW"
STATUS LED PCB
Ref. No. of EXPLODED VIEW : 36
GRILL ASSY
DISASSEMBLY
1. GRILL ASSY
and "EXPLODED VIEW"
GRILLE ASSY
Ref. No. of EXPLODED VIEW : 1
BAFFLE ASSY
DISASSEMBLY
2. BAFFLE ASSY
and "EXPLODED VIEW"
BAFFLE ASSY
Ref. No. of EXPLODED VIEW : A
SMPS PCB
DISASSEMBLY
6. SMPS PCB
and "EXPLODED VIEW"
SMPS PCB
Ref. No. of EXPLODED VIEW : 33
WiFi ANTENNA (2.4GHz, 5GHz)
DISASSEMBLY
4. WiFi ANTENNA (2.4GHz, 5GHz)
and "EXPLODED VIEW"
WiFi Antenna PCB (2.4GHz)
Ref. No. of EXPLODED VIEW : 7a, 7b
WiFi Antenna PCB (5GHz)
Ref. No. of EXPLODED VIEW : 6a, 6b
AMP PCB
DISASSEMBLY
3. AMP PCB
and "EXPLODED VIEW"
AMP PCB
Ref. No. of EXPLODED VIEW : 39
KEY PCB
DISASSEMBLY
7. KEY PCB
and "EXPLODED VIEW"
KEY PCB
Ref. No. of EXPLODED VIEW : 23
31
Caution in
servicing
Electrical Mechanical Repair Information Updating