Denon DN-2100F - Detailed Preset Function Descriptions

19
ENGLISH
(“*” indicates the default setting.)
(0) Preset Clear: This restores the preset data to the factory default values.
q The presettings are initialized when the TRACK SELECT knob is turned while set to “0 PS CL On”.
w “0 PS CL OF” is displayed when initialization is completed.
(1) DSP play function selection: Selects the DSP mode playback function.
* ”1 S-LOOP” : Seamless loop play mode
“1 digi-S” : Scratch mode
(2) Auto Cue ON/OFF
* “2 A-CUE On” : The cue point is detected at a sound level of –54 dB.
“2 A-CUE OF” : Cue detection is not performed.
(3) Relay mode function selection: The relay playback mode can be selected with the CONT./SINGLE button.
”3 rELAY On” : The relay play mode can be selected.
* “3 rELAY OF” : The relay play mode cannot be selected.
(4) Digital Out
“4 D-Out On” : Digital data is output. (NOTE: The operable functions are limited.)
* ”4 D-Out OF” : Digital data is not output.
(5) E.O.M
* ”5 End OF” : No end of message is emitted.
“5 End (setting time)” : Set the end of message time. (10, 15, 20, 30, 60 or 90)
(6) Pitch Range
“6 Pitch (setting value)” : Select the pitch adjustment range (16, *10).
(7) Auto Close: Set the disc tray auto close mode.
“7 CLOSE OF” : The disc trays do not close automatically.
“7 CLOSE (setting time) ” : Set the time from which the disc tray is opened until it is closed automatically (10, *30 or 60).
(8) Power on play: Single relay playback starts automatically when the power is turned on.
“8 P-On P On” : Power on play on
* ”8 P-On P OF” : Power on play off
(9) Play Mode: Set the play mode which is set when the power is turned on.
* ”9 Single” : Playback ends at the end of the track.
“9 Cont” : Playback continues until the end of the disc.
(10) Time Mode: Set the time mode which is set when the power is turned on.
”10 ELAPS” : The elapsed time per track is displayed.
* “10 rEMAIn” : The remaining time per track is displayed.
“10 t-ELAPS” : The elapsed time per disc is displayed.
“10 t-rEMA In” : The remaining time per disc is displayed.
(3) Detailed Description of Preset Functions