Denon DN-S5000 User Manual

DN-S5000 Quick Start Guide
Track Change: Turn the rotary knob (on the upper right side) to desired track.
Search/Scan: Move the “Fast Search” lever to search forward or search back.
Skip Search: Quickly shift and release the “Fast Search” lever to its end for 1-min hops.
Frame Search: Turn the scratch mode knob to “Search” turn the top scratch disc until point is
found, press main CUE to save your new point.
Scratch: Insert Disc, turn scratch mode Knob to “MAIN”, press lower left PLAY button,
manipulate the top vinyl disc as desired.
Scratch Lever: Select “Both” for natural scratching. Select “Fwd” to mute the reverse sound
of audio.
Hot Disc: During play mode, press and hold the “Eject” button for more than 1 sec,
remove disc & insert new. Monitor, mix & play as normal.
Hot Starts: Press the A1 or A2 button to set a cue point during play. Press the same
button again to re-trigger.
Clear Hot Starts: Press and hold the “FLIP” button corresponding to the same row for more
than 1 sec.
Alpha Track: During Main play, press the alpha mode button, select track, monitor & mix
your Alpha track through the mixer.
Mirror Mix: During Main play, press and hold the alpha mode button for more than 1 sec,
press alpha play to start.
Pitch Range: Press and hold the “Pitch” button for more than 1 sec, turn rotary knob to
select pitch, (
±4,10,16,24,100%) press enter to save your new setting.
Key Adjust: Press the “Pitch” button until the orange “Key Adj.” icon is shown above the
pitch % in the display. Button Cycle; Pitch On -> Pitch & Key On -> All Off.
Brake/Echo: Press the “Brake/Echo” button once to active “Brake”, twice to activate
“Echo”, a third to turn all off. Button Cycle; Brake -> Echo -> All Off.
Dump/Reverse: Press the “Dump/Rvs” button once to set “Dump”, twice for “Rvs”, a third to
turn all off. Press the main PLAY/PAUSE to toggle on/off.
Button Cycle; Dump -> Rvs -> All Off.

Denon DN-S5000 Specifications

General

Brand	Denon
Model	DN-S5000
Category	CD Player
Language	English

Summary

DN-S5000 Quick Start Guide

Safety Instructions

General Safety Warnings

Covers warnings related to electric shock, fire hazards, and environmental risks.

Handling and Usage Precautions

Provides guidelines on handling power cords, avoiding product opening, and general care.

Connections and Installation

Device Component Identification

Identifies front panel controls, rear panel ports, and various connection jacks for audio and effects.

Top Panel Controls Overview

Playback and Cue Operations

Details operation of Play/Pause, Disc Eject, Hot Disc, and Cue functions for basic control.

Platter and Scratch Controls

Hot Start, Sampler, and Loop Functions

Advanced Top Panel Functions

Display, Search, and Memory Management

Pitch, Bend, and Effect Controls

Basic Operation Guide

Playback, Cueing, and Track Selection

Pitch Adjustment and Bend

Scratch Operation Details

Scratch Source and Direction Selection

Playing the Alpha Track (Real Time Sampler)

Alpha Track Mode Entry and Monitoring

How to enter Alpha Mode and monitor the secondary track.

Switching Tracks and Pitch Adjustments

Covers switching between main and alpha tracks and adjusting pitch.

Alpha Mode Operations

Entering and Monitoring Alpha Mode

Steps to activate and monitor the Alpha Track.

Track Switching and Pitch Control

How to switch between tracks and manage pitch settings.

Exiting Alpha Mode and Hot Start/Sampler

Seamless Loop, Hot Start, Stutter, and Splice

Setting Loop and Hot Start Points

Guides for defining A points for Seamless Loops, Hot Starts, and Stutter playback.

Playing Loops and Stutter Effects

Details on seamless loop playback, exit/reloop, and stutter playback.

Splice Functionality

Setting Splice Points

Splice Playback and Clearing

A/B Trim and Move Functionality

Selecting Trim or Move Mode

Adjusting and Saving Points

A3/A4 Controls for Sampler and Hot Starts

Selecting A3/A4 Mode

Sampler Functionality

Recording and Playing Samples

Sampler Loop and Exit Modes

Memo: Custom Setting Memory

About MEMO and Stored Items

Explains what memo points are and what can be stored.

MEMO Mode Operations

How to set, call, and clear memo data.

Preset Mode Operations

Preset Mode and Items

Preset Data Management

Program, Random, Relay Play, and Power On Play

Program Play Setup

Random and Relay Playback