Denon DN-961FA - CXD2500 AQ Terminal Function

BE
DON-955
TEA/SG
7
KA
Sa
CXD2500AQ Terminal Function
Terminal Symbol VO Terminal Function
No.
Input terminal for OK focussing. Use for Servo-autosequencer.
ie) nn
n
= o}]- N cos]
; Output to shift time constant of output filter for spindle motor.
MON ce) 1,0 ON/OFF control output for spindle motor.
4,Z,0 Servo control for spindle motor.
plo = Oo 0
1,Z,0 Servo control for spindle motor.
| Sampling GFS by 460 Hz and if it is "H", delivers "H" ; if it is continuously "L" 8 times, delivers "L".
TEST output. Normally GND.
Charge pump output for analog EFM PLL.
16 vPCO ie) 1,Z,0 Charge pump output for variable pitch PLL.
17 VCkI ie) Clock input from external VCO for variable pitch. fe center=16.9344MHz.
18 FILO [e) Analog | Filter output for master PLL. (slave=digital PLL)
19 | FIL { Filter input for master PLL.
20 PCO fe) 1,Z,0 Charge pump output for master PLL.
21 AVss Analog GND.
22 CLTV ! Control voltage input for master VCO.
23 AVpb Analog power supply (+5V).
24 RF { EFM signal input.
25 BIAS j Constant-current input for Asymmetry circuit.
26 ASY! i Comparator voltage input for Asymmetry.
27 | ASYO fe) 1,0 Full swing output for EFM. (L=Vss, H=Vop).
28 ASYE I L: Asymmetry circuit > OFF. H: Asymmetry circuit > ON.
FE sa aa eee ie OE
30 PSSL | Input to shift output mode of audio data. Serial output at L; parallel output at H.
31 | WDCK ie] 1,0 D/A Interface for 48 bit slot. Word-clock f=2 Fs.
32 LRCK ie) 1,0 D/A Interface for 48 bit slot. LR-clock f= Fs.
33 Vbb Power supply ( +5V }.
ie) At PSSL=1 for DA16 (MSB) output; PSSL=0 for serial data of 48 bit slot. (2s'COMP, MSB first).
a
oO
2
uo
(eo)
3 1,0 At PSSL=1 for DA15 output; PSSL=0 for bit clock of 48 bit slot.
36 | DA14 fe) 1,0 At PSSL=1 for DA14 output; PSSL=0 for serial data of 64 bit slot. (2s'COMP, LSB first).
.
'
44 | DAO6 ie} 1,0 | At PSSL=1 for DAO6 output; PSSL=0 for C2P0 output.
45 | DAO5 ie) 1,0 At PSSL=1 for DAO5 output; PSSL=0 for XRAOF output.
46 | DAO4 oO 1,0 At PSSL=1 for DA04 output; PSSL=0 for MNT3 output.
47 DAO3 fe} 1,0 At PSSL=1 for DAO3 output; PSSL=0 for MNT2 output.
48 DA02 ie) 1,0 At PSSL=1 for DAO2 output; PSSL=0 for MNT1 output.
49 DAOI | oO 1,0 At PSSL=1 for DAO1 output; PSSL=0 for MNTO output.
50 APTR 10) 1,0 Control output for aperture compensation. In H for R-ch.
51 APTL oO | 1,0 Control output for aperture compensation. In H for L-ch.
82