Denon DN-961FA - Page 83

70
79
Terminal Symbol
No.
52 Vss
XTAI
XRST
CLKO
CXD2500AQ
vO Terminai Function
XTAO | o | 1,0
| ss xTse |
| 6 [rst | o |
57 | CaM | o | 10
58 | C16M o | 10
59 | MD2 a ee
60 | DOUT °
62 | WFCK o | 1.0
63 | SCOR o | 10
64 | SBSO o | 140
65 | EXCK
66 _| SQSO o | 10
67__ | SQCK l
| 68 | MUTE
| co jsens | — | 120
X'tal oscillation circuit input. By selecting of mode, f=16.9344MHz or 33.8688MHz.
X'tal oscillation circuit input. f=_16.9344MHz.
Selection input terminal of Xtal. “L" for X’tal 16.9344MHz; "H" for 33.8688MHz.
2/3 Dividing output of 53 and 54 terminal. No change by variable pitch.
4.2336MHz output. When variable pitched, simultaneously changes.
16.9344MHz output. When variable pitched, simultaneously changes.
Digital-out ON/OFF control. ON at H; OFF at L.
Digita!-out output terminal.
When playback disc emphasized, outputs H; otherwise outputs L.
WEFCK ( Write Flame Clock) output.
Output of subcode sync. S04+S1. H output when either one detected.
Serial output of Sub P~W.
Clock iutput for SBSO read-out.
Output for Sub Q 80 bits and PCM peak level 16 bits.
Clock input for SQSO read-out.
Mute at H; remove mute at L.
SENS output. Outputs to CPU.
System reset input. Resets at "L".
P72 [xuar |_| |__| inputforlatch rom CPU. Latches serialdataatrelease.
73 Vpo Power supply (+5V).
74_| CLoK |
75__| SEIN i | [sensinputtromsse
76__| CNIN i | [inputottrackingpuise,
77 | DATO ° Serial data output to SSP.
78 | XLTO O° Serial data latch output to SSP.
Serial data transfer clock output to SSP.
Mirror signal input. Use for track jump for over 128 tracks, using autosequencer.
oa
Digiter PLL
ver i-paten
(8)
os (ciasve seve
Tiaing
fenesetoc2?
wm ASYmmetry
correction.
83
DN-951FA/S6 1FA |