HANDY OPERATIONS
(1) Startin
Playback from the Middle of a Track (Manual
Search)
• When a track is selected and the PLAY/PAUSE button is pressed,
playback starts from the beginning of that track. To start from a
different position in the track, use the procedure described below
to find the desired position.
(2) Playin
at a Different Speed (Pitch)
• Use this function to play discs at different speeds.
• The speed can be changed within the range of -9.9 to +9.9%.
NOTE:
When the play speed (PITCH) is set, the display shows the set
pitch, but the disc is played at the standard speed until the
PITCH button is pressed (and the button is lit). When the play
speed is changed, the sampling frequency of the digital output
signal also changes, so it may not be possible to receive digital
si
nals.
15
To Next Page
Loading...
Need help?
General