How to troubleshoot a Denon CD Player with no power?
If your Denon CD Player has no power, ensure the AC power cord is properly connected. If it is, try unplugging the AC cord, waiting 5-10 seconds, and then plugging it back in.
What to do if my Denon DVD-756 has no sound or picture?
If you're experiencing no sound or picture with your Denon CD Player, verify that your TV is turned on and check the video and HDMI connections. Also, check the AUDIO/VIDEO cable connections to the TV. If using HDMI, and progressive signals are not output from the COMPONENT VIDEO OUT jacks, press the HDMI button on the front panel to set the HDMI output mode to OFF. Ensure that PURE DIRECT is set to “OFF,” and confirm that the VIDEO OUT mode is set correctly.
Why is there no sound or distorted sound from my Denon DVD-756?
If you're getting no sound or distorted sound from your Denon CD Player, start by adjusting the volume and checking that the speakers are connected correctly. Note that HDMI sound is not output during PURE DIRECT or when AUDIO MODE is set to “ANALOG.”
How to fix no image from HDMI connection on Denon DVD-756 CD Player?
If you have no image from the HDMI connection on your Denon CD Player, first check the HDMI connection itself. Verify that your connected monitor or equipment supports HDCP, as the player requires this to output a video signal. Try connecting the DVD player to the display equipment using the Audio/Video cables and check the HDMI settings. Ensure the output format of the player (HDMI FORMAT) matches the supported input format of your connected equipment. Finally, check if PURE DIRECT is set to “ON” and, if so, set it to “OFF.”
What to do if my Denon CD Player can't play a disc?
If your Denon CD Player can’t play a disc, try cleaning the disc first. Make sure the disc label is facing up. Test with another disc to see if the original disc is defective. Also, check and cancel the ratings control or change the control level if necessary. Ensure that you are inserting a disc that is compatible with the player.
Why is the picture distorted on my Denon DVD-756?
If you notice a distorted picture on your Denon CD Player, be aware that a small amount of picture distortion may appear and is not necessarily a malfunction. Try connecting the DVD player directly to the TV. Also, check if the VIDEO OUT mode is set correctly.
What causes a completely distorted or black/white picture on Denon DVD-756 CD Player with DVD?
If you are seeing a completely distorted or black and white picture with your DVD on your Denon CD Player, try connecting the DVD player directly to the TV. Also, make sure the disc is compatible with the DVD player.
How to fix picture freezing during playback on Denon DVD-756?
If the picture freezes momentarily during playback on your Denon CD Player, inspect the disc for fingerprints or scratches. Clean the disc with a soft cloth, wiping from the center to the edge.
How to reset forgotten password for rating level on Denon DVD-756?
If you've forgotten the password for the rating level on your Denon CD Player, enter the default password “4737”. This will clear your forgotten password.
Why is there no audio at digital output on my Denon CD Player?
If there is no audio at the digital output of your Denon CD Player, check the digital connections and the audio settings. Digital signals cannot be output with Super Audio CDs, so use analog connections instead. Also, the area/layer of Super audio CD being played (MULTI/STEREO/CD) must match amplifier connections.
To Next Page
General
