10
S-81/S-81DAB
CD TEST MODE
No
Button name
Function Display
S1
Version No. of
iPod Dock and-
Main MPU Dis-
play Mode
・Plug AC cord into power outlet while pressing the
STOP button and the button same time
on Main Unit.
・The Version number of iPod Dock and Main MPU
is displayed.
・Unplug AC cord to clear this mode.
++++ :The version number of iPod Dock
( When the iPod Dock is connected)
***** :The version number of Main MPU
S1.2
EEPROM testing
Mode
・When the version number is displayed, press
the
PLAY button on Main Unit.
・POWER LED illuminantes ORANGE to sign the
test mode started. MUTING ON.
・When power LED lighted BLUE, this EEPROM
test was OK.
・When power LED lighted RED, this EEPROM test
was NG.
・Unplug AC cord to clear this mode.
・All segment turn off.
S2
FLD(VFD) check-
ing mode
・Plug AC cord into power outlet while pressing the
PLAY button and the button same time on
Main Unit.
・All segment of FLD is turning on and off every
one second and all LED of Main unit’s button is
turned on. MUTING ON.
・Unplug AC cord to clear this mode.
・All LED of Main unit’s button is turned on.
・All segment turn on and off.
S3 Version Up mode
・Plug AC cord into power outlet while pressing the
FUNCTION button and the CD STOP/BAND but-
ton same time on Main Unit.
・"VERSION UP” is displayed on the FL tube, then
the disc tray is opened.
・Load the disc containing the data for updating the
system microprocessor or CD microprocessor
version, then press the OPEN/CLOSE button on
Main Unit to start updating the version.
* The version update data is written on separate
discs.
・Version update mode
・Files being checked
・File checking completed
Main MPU : ****** : SYSTEM
CD : ****** : CD
・Old data being cleared
Main MPU : ****** : SYSTEM
CD : ****** : CD
・Version update data being written
Main MPU : * : writing counter (from 0 to 9)
CD テストモード
No キー名称 機能 表示
S1
iPodDock と
メインマイコンの
バージョン表示モード
・本体 STOP ボタンと ボタンを同時に押しなが
ら、AC コードをコンセントへ接続する .
・iPodDock とメインマイコンの Ver を表示する.
MUTINGON.
・AC コードを抜くことによりモードを解除する.
++++ :iPodDock の Ver 番号
(iPodDock 接続時)
***** :メインマイコンの Ver 番号
S1.2
EEPROMTEST
モード
・バージョン番号表示状態で、本体 PLAY ボタンを押
す.
・POWERLED が橙色に点灯する (TEST 開始 ).
MUTINGON.
・EEPROMTEST 後、OK の時は、青色に点灯す
る.
・EEPROMTEST 後、NG の時は、赤色に点灯す
る.
・AC コードを抜くことによりモードを解除する.
・全てのセグメントを消灯する.
S2
FL(VFD) 管
チェックモード
・本体 PLAY ボタンと ボタンを同時に押しなが
ら、AC コードをコンセントへ接続する.
・FL 管の全てを 2 秒周期で点滅 (1 秒点灯、1 秒
消灯 ) し、本体ボタンの LED を全点灯する.
MUTINGON.
・AC コードを抜くことによりモードを解除する.
・本体ボタンの LED を全点灯する.
・全てのセグメントを点灯・消灯する.
S3 VERSIONUPモード
・本体 FUNCTION ボタンと CDSTOP/BAND ボタンを
同時に押しながら,AC コードをコンセントへ接続す
る.
・FL 管に "VERSIONUP" を表示し、トレイが OPEN
する.
・SYSTEM マイコンまたは CD マイコンの VersionUp 用の
データが入った DISC を装着し、本体 OPEN/
CLOSE ボタンを押し、VersionUp を開始する.
※ VersionUp 用のデータは、別々のDISC に書か
れていること.
・VersionUp モード時
・ファイルチェック中
・ファイルチェック終了時
メインマイコンの場合:******:SYSTEM
CD の場合 :******: CD
・旧データ削除中
メインマイコンの場合:******:SYSTEM
CD の場合 :******: CD
・VersionUp データ書き込み中
メインマイコンの場合:* :書き込みカウンタ (0 〜 9)