Denon UCD-250 - Page 7

®
& OPEN/CLOSE button: Deck 2
Press this button to open and close the cassette tray. The
button also works in the standby condition.
e@ Deck 1 is for playback only and deck 2 is for recording and playback.
e
After
the
power
cord
is
plugged
into
an
outlat,
a
mechanical
sound
is
produced
from
the
cassette
deck
when
the
power
switch
is
C2)
pressed
on
the
first
time
only.
This
is
the
sound
of
the
cassette
mechanism
being
set
to
the
proper
operating
position,
and
is
not
a
problem
with
the
deck.
0
Disc tray
Compact discs are loaded to the disc tray.
U Pause button
Press this button to stop CD play temporarily.
Press the play button to resume CD play.
BB Stop button
Press this button to stop CD play.
> Ptay button
Press this button to start playing the disc. if pressed when
the disc tray is open, the disc tray closes and playback
begins. Pressing this button in the standby mode automati-
cally switches on the power and pisys the disc.
& OPEN/CLOSE button
Press this button to open the disc tray. Press once to open
the disc tray forward, then press again to close the disc
way. This button siso operates in the standby mode.
POWER ON/STANDBY switch
Press this to switch the CD player's power on and off.
TAPE A/B button
Press this button during editing to switch the display
between the display of program contents for tape side A
and the display for tape side B.
EDIT button
Press this button for edited recording (dividing the tracks to
be recorded to fit onto sides A and B of a tape according to
the length of the tape).
Display
This displays the time and the settings of the various
buttons.
RANDOM button
Press this button to play the disc tracks in random order.
REPEAT button
Press this button for repeat play.
14d 4
button)
Press this button to move the pickup back to the beginning
of the desired track.
Press in the play, stop, or pause mode to move back a
number of tracks equa! to the number of times the button is
pressed.
(automatic/manus! search backward
DD PPI (automatic/ manual search forward buttan)
Press this button to move the pickup forward to the
beginning of the desired track.
Press in the play, stop, or pause mode to move forward a
number of tracks equal to the number of times the button is
Pressed.
* The automatic sesrch function is set if button @ or @ is
released within 0.5 seconds, and the manual sesrch
function is set if the button is held in for more than 0.5
seconds.
* Buttons @ and @ do not function in the pause mode.
~~
TUNER-PREAMPLIFIER DISPLAY
The reception frequency, SDB on/off setting, func-
tion, time, and timer settings are displayed here.
Lights up when signals are received from
the remote contro! unit.
SS
LW FM
IMEMO| TUNED STEREO
This flashes for about 10 seconds when
the MEMORY button is pressed during
Presetting.
@ To open the trap door, press area of the PUSH OPEN &
indication at the uppar right of the panel. When the door Sock is
released, open the door with your hand.
@ To close the trap door, press the indicated ares at the upper
sight of the panel and lock the door.
w- 81.50
AUTO MONO TAPE MON
This lights when the tape
monitor is on.
These indicate the FM reception mode.
STEREO :
AUTO — : Lights when the auto mode is set with the
MONO : Lights when the mono mode is set with the
ON: Lights when the timer starting time is set.
OFF: Lights when the timer ending time is set.
ights to indicate that
the timer is set.
Indicates the bend being re-
This tights to indicate that
the sleep timer is se’
MHz P 3 ON TIMER ©
kHz OFF SLEEP
ae
This lights up when the play button of the system cassette
deck (UDR-250} or CD player (UCD-250) is pressed to switch
on the power.
tt also lights up when the power is switched on with the
Preset channel button of the remote control. This display
indicates that the power will be switched off about 10
minutes after the end of cassette or CD play, or about 10
minutes after the “TUNED” indicator goes out.
Lights when receiving stereo broadcasts.
MONO/STEREO button.
MONO/STEREO button.
NOTE:
e The* (e) * of the timer standby display will not light up
unless the current time and the timer have been set.
« When the FUNCTION button is used to switch the
function while “AUTO OFF” is lit, the auto on/off mode
is cancelled and the display goes out.
Also note that when the play button of one of the
components {CD player or cassette deck) is pressed
while “AUTO OFF" is lit, causing the function to change,
the auto on/off mode will not be cancelled and the
display will remain lit.
G)
m
z
m
Be)
>
-
no
m
QO
a
O
z
SS OS — ee a a