Denon UDR-F10 - Page 22

OPilaying a certain section repeatedly ........
Example: Using a CD containing 15 tracks
{1) When pressed during playback:
[9 |
2
(2} When pressed before playback:
(1) When pressed during playback:
ist press
ae 1S
eR S Re Sete
(2) When pressed before playback:
When pressed during playback:
When pressed during ptayback:
Press the REPEAT button ag
2nd press
22
to return to norma! playback.
A-B Repeat
The single-track repeat mode is set and that track
number is displayed on the music calendar.
The single-track repeat mode is set and that track
number is displayed on the music calendar.
Next,
@ Press the play button (P) to play the first
track repeatedly.
@ If playback is started using the direct search buttons
on the remote control unit or the DP/ PPI and
#44/44 buttons on the CD player, the specified
track is played repeatedly.
The numbers of all the tracks on the disc are displayed on
the music calendar, and the all-track repeat mode is set.
“REPEAT” and A“ light.
“REPEAT” and “A-B” light, and the section
between points A and B is played repeatedly
Playing the tracks in a Certain OFDEF -..........ceceeecee nec cseseee cee enesneneeneateeenen centers etecaeeessnesasaearenasenenareseetsenetes Programmed Playback
(Using the remote contro! unit}
Example: Programming the 3rd track to play first, the 18th track to play second, using a CD containing 18 tracks and with a
playing time of 62 minutes, 03 seconds
Procedure
Press the PROGRAM button.
53 08.00.
Press “3” to set the 3rd
track at the first piace After 2 seconds
in the program. == — ot
Display when the 3rd track
{8 minutes, Q0 seconds tong) is
set at the first place
1B 24.0S.
Press “+10" and “8” to set
the 18th track at the second After 2 seconds
place in the program. Ge
Display when the 18th track
(16 minutes, 05 seconds long)
is set at the second place
Press the play button (Db). The tracks are played in the
programmed order.
Other operations possible during programmed playback:
Such operations as quick search, pause and skip monitor are also possible during programmed playback.
For the quick search function. press the automatic/manual search reverse button (I€€ / €4) to move back to the beginning of
the track, then press it again while the time display reads “ 00.00.”.
To move ahead to the beginning of the next track, press the automatic/ manual search forward button ( DP / PPI), regardless of
the time display.
NOTES:
«@ The numbers of the programmed tracks on the music calendar turn off after the tracks have been played.
elf a track with a number of 21 is greater is programmed, the time display will read “--M--S”
e With this CD player, up to 20 tracks with any track number between 1 and 99 can be programmed.
elf a number greater than the total number of tracks on the disc is specified, that number will not be displayed.
« Programming is also possible with the disc tray open. In this case it is possible to program a track number not included
on the disc, but when the program is piayed, that track number will be skipped.
«The entire program is cancelled when the OPEN/CLOSE button is pressed.
elf you make a mistake when programming, press the CANCEL button to cancel the mistake. (The last track in the
program is cancelled each time the CANCEL button is pressed.)
e The single-track and A-B repeat functions do not work during programmed playback.
«@ Set the stop mode when cancelling tracks from the program.
Q
mi
2
m
PB
>
om
n
m
r)
a
2)
2
SE SS SP TIE () -o-C 7