Denon UDR-F10 User Manual

Sz
@Moving ahead to the next track during playback
CD player (UCD-F10} ;
Press the automatic/manual search forward button
(DP / Ppt).
Automatic/manual search
forward button { DD/ PPI)
@Moving back to the beginning of the track during playback oo... eee eceseaeeseececesessuseeeesecanscanesessueseesessace
CD
player
(UCO-F10)
Press
the
automatic/manual
search
reverse
button
(4d / 44).
Sy. CiG8288.88. 28
Automatic/manual search
reverse button (Iq / 44)
OFinding a certain spot on the disc while listening to the sound
@ Use this function to skip through the disc while listening to the sound.
© When the desired spot is reached using the skip monitor function, release the automatic/manual search forward button
(>> / PPI) or automatic/manual search reverse button (§44/44) to resume normal playback from that point.
{1} Forward skip monitor
@ The track currently being monitored and the elapsed time
for that track are indicated on the display.
© If the end of the last track on the disc is reached while
pressing the automatic/manual search forward button
(D> / PPI), “33” appears on the display and the manual
search operation stops.
To continue playback, press and hoid in the automatic/
manual search reverse button (44/44) unti! a track
number appears on the display, then perform the desired
operation.
CD player (UCD-F10)
-C}8G=588.88. ==
Automatic/manual search
forward button (Pb / PPI)
During playback, press and hold in the automatic/manual
search forward button { PP / PPI) to skip through the disc in
the forward direction while listening to the sound.
{2) Reverse skip monitor
CD player {UCO-F10)
Ci6@@=88.8
Automatic/manual search
reverse button (144/44)
During playback, press and hold in the automatic/manual search reverse button (I¢4 / 44) to skip through the disc in the
reverse direction while tistening to the sound.
if the automatic/manual! search forward or automatic/manua! search reverse button is pressed during programmed
playback then released at a track not in the program, that track is played to the end, then the next track in the program is
played.
OPlaying the tracks in random order
(Using the remote control! unit)
e@ Use this function to play al! the tracks on the disc once in random order.
RANDOM button
® Press the RANDOM button to turn on the
indicator, then press the play button to start random
playback.
@ During playback, simply press the RANDOM button to set
the random playback mode.
e@ The random playback mode cannot be set during editing.
NOTES:
e The total remaining time cannot be displayed during the random playback mode.
@ The track currently being monitored and the elapsed time
for that track are indicated on the display.
e If the beginning of the first track on the disc is reached
while pressing the automatic/manual search reverse
button (144/44), “C £” appears on the display and the
manual search operation stops.
To continue playback, press and hold in the automatic/
manual search forward button (DPP/ DPI) until a track
number appears on the display, then perform the desired
operation.
e The programmed tracks can be played in random order
by pressing the RANDOM button when tracks are prog-
rammed.
If the RANDOM button is pressed while the repeat mode
is set, the tracks are each played once in random order,
then played again in another order, and so on.
@ Random playback cannot be set in the single-track or A-B
repeat mode.
@ While the next track is being searched for, the numbers of
all the tracks on the disc are displayed rapidly on the track
number display so it is not possible to know which track
will be played next.
© The random playback mode is not set when the RANDOM
button is pressed during the single-track repeat mode. To
set the random playback mode, first cancel the single-
track repeat mode.
NOILOAS TVWHAN3D

Denon UDR-F10 Specifications

General

Brand	Denon
Model	UDR-F10
Category	Stereo System
Language	English