Denon UDRA-70 - REMOTE CONTROL UNIT; Inserting the Batteries; Button Names and Functions

ENGLISH
REMOTE CONTROL UNIT
@ Open the battery case lid on the back
Remote contro! sensor of the remote contro! unit.
e The remote control unit can be used
a straight distance of approximately
7 meters from the remote control
sensor, but this distance will be
30° shorter if there are obstacles in the
way or if the remote control unit is
SS
operated from an angle.
Remote control transmitter
@® Insert the two batteries (R6P, AA) in
the proper direction.
“Hi” appears at the upper left corner of
the tuner’s display when signals are re-
ceived. ® Set the battery case lid back in place.
@ Be careful that the remote contro! sensor is not exposed to direct
sunlight or strong light from lighting fixtures. If it is, the remote
control unit may not work.
e@ When adjusting the volume from the remote controi unit, the volume will stop changing if the remote control transmitter is moved away
from the remote control sensor. Press the button again to continue changing the volume.
Button Names and Functions
Stop button {( HI) Play button ( P» )
Press this to stop CD playback. Press this to start playback of the CD.
POWER button
SLEEP button
Press this to turn on the power for the entire Press this to set the sleep timer.
Pause button (II)
Press this to temporarily stop playback. Press
the play button (P) to resume playback.
Auto search button (144)
Press this button during playback to return to
the beginning of the currently playing track.
Press again within 0.5 seconds to move to the
beginning of the previous track.
Search button (44)
Auto search button (>P#)
Press this to move backward.
Press this button during playback to advance
DIRECT
button
to
the
beginning
of
the
next
track.
Press
again
within 0.5 seconds to move to the beginning of
the following track.
Press this for direct search on the CD player.
PROG button
Press this for programmed search on the CD
player.
Number buttons
TIME button
Press this button repeatedly to switch the CD
player time display between the remaining
time per track, the total remaining time, and
the elapsed time per track.
tecall preset stations. CANCEL button
When playing a CD, press these after pressing : ; tet
the DIRECT or PROG button to specify track fas once: ale mae to cancel the
numbers. program rack,
Deck
operation
buttons
FUNCTION
button
Use these buttons to operate the cassette deck. Orr cn od TUNER,
To record, press the REC/REC MUTE button 7 GD, an -
then one of the PLAY buttons (¢ or DP). Press
the REC/REC MUTE button twice to create a VOLUME buttons
Cee ee
5-second blank space on the tape.
The recording pause mode is set when the REC Use these to adjust the volume.
PAUSE button is pressed during recording. Press > to decrease the volume, < to increase
[ it
Press these after pressing the TUNER button to
SDB (Super Dynamic Bass) button
Press this for a sound with more powerful
bass, Press again to return to the normal
sound.
10