Denon UDRA-70 - Playing Tracks in a Certain Order; Programming Track Playback Sequence; Programmed Playback Operations

ENGLISH
DEUTSCH
FRANCAIS
ITALIANO
ESPANOL
@ Playing Tracks in a Certain Order, Wiedergabe der Musiktitel in einer bestimmten Reihenfolge
Lecture de plages dans un certain ordre, Riproduzione dei brani in un’ordine particolare
Para reproducir las cintas en un orden especifico
Example: Programming track 3 to play first and track 18 to play next. Disc with 18 tracks and a playing time of 62 minutes, 03 seconds
Beispiel:
Die
Programmierung
wird
so
vorgenommen,
da8
zuerst
der
3.
Musiktitel
und
anschlieBend
der
18.
Musiktitel
wiedergegeben
wird.
CD-Platte
mit
18
Musiktiteln
und
einer
Abspielzeit
von
62
Minuten
und
03
Sekunden
Exemple: Programmer la plage 3 a lire en premier et la plage 18 a lire ensuite. Disque avec 18 plages et un temps de lecture de 62
minutes, 03 secondes
Esempio: Programmazione del brano 3 come primo brano e del brano 18 come secondo brano. Disco con 18 brani ed un tempo di
riproduzione di 62 minuti, 03 secondi
Ejemplo: Programacién de la pista 3 para se reproducida primero y la pista 18 a continuacion. Disco con 18 pistas y un tiempo de
reproduccién de 62 minutos, 03 segundos
TRACK nm f IN
Press the PROG raf u 4 5 ver
button
PROGRAM
4294567899011 1213 1418 1617 18
na nN OISC IN
Wow Lt Us
PROGRAM
Nn
|i
Set track 3 to play
first.
After 2 Display when track 3 is set to play first
seconds First track time — 8 minutes, 00 seconds
! nN OISC IN
t es it S s
PROGRAM
Set
track
18
to
play
"
second.
REMOTE
CONTROL
UNIT
AC142
Display
when
track
18
is
set
to
play
7 =] second
seconds u Total time of first and second tracks — 16
minutes, 05 seconds
Press the PLAY The tracks are played in the programmed
button. order.
The programmed track number turns off once that track is finished.
“— —min — —sec” is displayed if a track number of 31 or higher is set in the program.
When a program is set during playback after direct search, the track currently playing is set as the first track in the program.
Up to 20 tracks from among track numbers 1 to 99 can be programmed with this CD player.
If you attempt to program a track number higher than the number of tracks on the disc, the display will not change.
Programming is possible with the disc holder open. When this is done, it is possible to program a track number higher than the number
of tracks on the disc, but when playback starts, that track number is ignored.
There is a silent interval of 4 seconds between tracks. This is designed so that a blank section of 4 seconds will be created between
selections when recording programmed tracks onto a tape.
The program is cleared when the disc holder is opened or closed (by pressing 4).
If you make a mistake when programming tracks, press the CANCEL button and reprogram. (The last track programmed is canceled
when the CANCEL button is pressed.)
e Other operations possible during programmed playback:
Operations such as quick search, pause and skip monitor can be performed during programmed playback. For quick search, to return to
the beginning of the previous track, press I€@ once, then press I€q again while the TIME display reads 0 Own 0 Osec. To move ahead
to the beginning of the following track, simply press PP, regardless of the TIME display.
e DEUTSCHE — SEITE 26 e FRANCAIS — PAGE 40 e ITALIANO —PAGINA 54 e ESPANOL — PAGINA 68
80