Denon UDRA-70 - CD PLAYER FUNCTIONS; CD Player Controls; CD PLAYER DISPLAY

CD PLAYER
DENON comacrosc maven
*
Disc tray
The disc tray opens forward when the OPEN/CLOSE button @ is
pressed.
To close the disc tray, press the OPEN/CLOSE button @ again.
It PAUSE button
Press this button to stop playback temporarily.
Press the PLAY button to resume playback.
HH STOP button
Press this button to stop playback.
> PLAY button
Press this button to start playing the disc.
If pressed when the disc holder is open, the disc holder closes and
playback begins.
o 8
©
Play indicator
This lights when the disc is played and sound is output.
OPEN/CLOSE button
Press this button to open and close the disc holder.
Press once to open the disc holder forward, then press again to
close the disc holder.
1)
Track
CD PLAYER DISPLAY
Tape type and remaining
time display
During the editing func-
tion, C-20 lights and the
rc
This diagram shows the trap door open.
80 is displayed when the disc data cannot be read properly.
When a disc is loaded:
e The total number of tracks is displayed in the stop mode.
e The track number is displayed in the play and program modes.
¢
{[
or
]]
is
displayed
when
the
innermost
or
outermost
section
of
the
disc
is
reached
in
the
manual
search
mode.
Time dispiay
0000 js displayed when the disc data cannot be read properly.
When a disc is loaded:
e The elapsed playing time is displayed in the stop mode.
©
The
elapsed
time
for
the
track
currently
playing
is
displayed
in
the
play
and
pause
modes.
e
The
elapsed
time
for
the programmed
tracks
is
displayed
in
the program
mode.
ENGLISH
144 44 (automatic/ manual search reverse button)
Press this button to move the pickup back to the beginning of the
desired track.
Press in the play or pause mode to move back a number of tracks
equal to the number of times the button is pressed.
>> PPI (automatic/ manual search forward button)
Press this button to move the pickup forward to the beginning of the
desired track.
Press in the play or pause mode to move forward a number of tracks
equal to the number of times the button is pressed.
* The automatic search function is set if the button is released
within 0.5 seconds, and the manual search function is set if the
button is held in for more than 0.5 seconds.
REPEAT button
Press this button for repeat playback.
EDIT button
Press this button for edited recording (dividing the tracks to be
recorded to fit onto sides A and B of a tape according to the tape’s
length).
TAPE A/B button
Press this button during editing to switch the display between the
display for side A and the display for side B of the tape.
number display
The indicators switch as follows when
tape time is displayed.
TRACK “03
/
EDIT U
( PLay:n PAUSE]
ie oe
[A] tare [5]
[wrsssrapw ae 3 t4 15 0
» PLAY lights when the disc is play-
ing, and tl PAUSE lights when in the
pause mode.
During editing, EDIT, (J, and TAPE tight, the remaining time for side A is
displayed on the time display, the numbers of the tracks set for side A light on the
calendar display, while the numbers of the tracks set for side B flash. When the
TAPE A/B button is pressed, [A] turns off, [B] lights, and the remaining time and
numbers of the tracks set for side B are displayed in the same way as for side A.
PROGRAM lights during the programmed
search mode.
eNO DISC lights on the display if no disc is loaded, or if the disc is loaded upside-down or is heavily scratched or dirty.
NO DISC IN the REPEAT button is pressed in the
play mode:
First press : REPEAT wl
1718 1920) (OVER) Second press : REPEAT
Third press ; REPEAT [A]- BI
Fourth press : Off
This lights when
there are more than
20 tracks on the disc,
These indicate the time display mode.
TOTAL lights when the remaining time for ail tracks
is displayed.
SINGLE lights when the remaining time per track is
displayed.
“Music calendar” display
This
indicates
the
numbers
of
the
tracks
on
the
disc,
up
to
a
maximum
of
20,
The track numbers turn off after the corresponding tracks are played.
In
the
program
mode,
the
numbers
of
the
programmed
tracks
are
displayed,
up
toa
maximum
of
20.
All indicators, 1 to 20, light when the disc data cannot be read properly.