Denon UDRA-90 - Setting the Once Timer; Single Event Timer Setup

Setting the Once Timer
(Preset the AM and FM stations in advance)
DENON — rasona conronenr srsremsrenen abcever UDKA.9)
PUNCTION BAND PRESETCALL
600G® 8000
O20) a O86
Example: Setting the timer to turn on at 12:35 and off at 12:56.
522 kHz AM is being received on preset number “2”.
1611 kHz AM is set to preset number “15”.
Press the POWER button.
Press the TIMER button.
Press the DOWN button
to display “ONCE”.
4 | Press the ENTER/NEXT button.
POWER
ON/STANDBY. Flashes
7 TIMER
“= TIMER
5 Press the UP and DOWN buttons
to display “TUNER”.
© Ry
DOWN UP
AUTO TUNING
Press the ENTER/NEXT button.
@fu
ENTER
/ NEXT.
Press the UP and DOWN buttons
to set the preset number 15.
© RSS
DOWN UP
AUTO _ TUNING
Press the ENTER/NEXT button.
Sat
/ NEXT.
Use the UP and DOWN buttons
to set the hour at which the
timer is to switch on.
© &
DOWN UP
AUTO _TUNING
10 | Press the ENTER/NEXT button.
SoU
/ NEXT.
Use the UP and DOWN buttons
to set the minutes at which the
timer is to switch on.
© &
DOWN UP
AUTO TUNING
o& 0
/ NEXT.
Press the ENTER/NEXT button.
&
DOWN UP
AUTO _TUNING.
Use the UP and DOWN buttons
to set the hour at which the
timer is to switch off.
Press the ENTER/NEXT button.
/ NEXT.
© >
DOWN UP
AUTO _TUNING
/ NEXT
ey
STANDBY
Use the UP and DOWN buttons
to set the minutes at which
the timer is to switch off.
TR
TUNED
once
AM 5 een
Press the ENTER/NEXT button.
Press the STANDBY button.
“TIMER G- is The itlumination goes off and
displayed. the current time is displayed.
POWER
ON/STANDBY.
C2
@ When the STANDBY button is pressed and the “ © mark is lit, the timer will function one time only.
@ To switch off the timer, press the STANDBY button and turn off the “ © ” mark.
Press the POWER button.
NOTE:
The standby mark “ ©G “wiltnot light unless the current timer has been set. Should this be the case, set the current time,
then press the STANDBY button.
13