Denon UDRA-90 - Page 12

ba
Flashes
Setting
the
Timer
Use
the
UP
and
DOWN
buttons
to
. set the minutes at which the 2, Soy
(Preset the FM and AM stations in advance) timer isto ‘swith on: AUTO AUTO_TUNING.
Press the ENTER/NEXT button. SS
/ NEXT.
ENON rrasonat conmonent system stento Receiven UDRA-90
Use the UP and DOWN buttons to © @
set the hour at which the DOWN UP
timer is to switch off. AUTO TUNING
G
Press the ENTER/NEXT button. ENTER
/ NE
oo
oo
Bese
gee"
g
¢
Use the UP and DOWN buttons to oy
set the minutes at which DOWN uP
the timer is to switch off. AUTO _TUNING
Example: Setting the timer to turn on at 12:35 and off at 12:56.
90.00 MHz FM is being received on preset number “1”. eeu
87.50 MHz FM is set to preset number “3”. Press the ENTER/NEXT button. ENTER
G
Press the STANDBY button. asi,
STANDBY
POWER Flashes
Press
the
POWER
button.
ON/STANDBY
A TIMER
Press the TIMER button.
is The illumination goes off and
POWER i . the current time is displayed,
ON/STANDBY
Press the POWER button. C=
Press the ENTER/NEXT button. @ When the STANDBY button is pressed and the “ © “ mark is lit, the timer will function at the same times each day.
© To switch off the timer, press the STANDBY button and turn off the ” © ” mark.
Flashes
Press the UP and DOWN buttons
to display “EVERY”. pees TIMER
NOTE:
Press the UP and DOWN buttons —= The timer standby mark “© ” will not light unless the current timer has been set. Should this be the case, set the current
to display “TUNER”. even time, then press STANDBY the button.
aid TUNER
NOTE:
Press
the
ENTER/NEXT
button.
1)
When
there
is
an
irregularity
in
the
contents
of
the
display
or
in
the
operation,
unplug
the
power
cord
from
the
power
outlet, then, while pressing down both the DOWN button of AUTO TUNING and the MEMO button at the same time,
plug the power cord into the power outlet again.
Ste FM 87.50~
p
Flashes All conditions will return to their initial settings and the display will appear normal. It will now be necessary to reset
Use the UP and DOWN buttons to YQ, &y the presets, current time, and the timer setting time.
set the preset number 3. AUTO_TUNING TUNING Flashes 2) To enable remote control operation of this system, the AC power is always supplied to the system, Even when the
POWER button has been switched off, the display of the tuner will continue to be lit dimly.
Press the ENTER/NEXT button.
Use the UP and DOWN buttons to © G Sey
set the hour at which the timer DOWN
is to switch on. eacLLea 1EL TUNING
Press the ENTER/NEXT button.