To Next PageTo Next Page
Need help?Do you have a question about the DENQBAR DQ-0139 and is the answer not in the manual?
Explains safety symbols and their meanings.
Emphasizes reading the manual for safe operation.
Advises wearing ear protection due to noise levels.
Warns about touching electrical parts, cables, or spark plugs.
Warns about hot engine and exhaust parts.
Recommends wearing protective shoes with steel toes.
Prohibits open flames and smoking near fuel and oil.
Caution regarding handling highly flammable materials like gasoline and oil.
Warns of hand injuries from belt entanglement and the need for covers.
Warns of falling risks when working near edges of embankments.
Outlines operator age, fitness, and instruction requirements.
Lists safety rules for operating the machine.
Details pre-operation checks for safety and functionality.
Rules for using original parts and performing maintenance.
Addresses risks not eliminated by safety instructions.
Warns about moving parts and machine stability issues.
Explains health impacts of prolonged vibration exposure.
Warns about working near walls, pipes, and unstable ground.
Warns about touching hot exhaust and engine parts.
Ideal use cases and environments for the compactor.
Specifies the maximum allowed tilt angle.
Explains how the exciter generates vibration.
Safety precautions for lifting the compactor using a device.
Guidelines for using transport wheels safely and correctly.
Advice on soil types, moisture, and testing for optimal compaction.
Safety rules for operating the compactor on slopes and embankments.
Instructions on when to use or remove the compactor's rubber mat.
Steps for attaching the compactor's handle securely.
Instructions for fitting and securing the transport wheel.
Ensures machine is assembled and secure before initial start-up.
How to check and fill the engine oil level correctly.
Checking oil level for the DQ-0139 model's exciter.
Inspecting the air filter for cleanliness and proper condition.
Specifies approved gasoline types and important handling precautions.
A checklist of items to verify before each engine start.
Refers to the separate engine manual for starting and stopping procedures.
How to control forward motion using the throttle lever and accelerator.
Procedures for checking and changing exciter oil for specific models.
How to properly tension the V-belt for optimal performance.
Instructions for cleaning the compactor plate and engine cooling fins.
General| Motor Power | 550 W |
|---|---|
| Motor Speed | 2800 RPM |
| Overload Protection | Yes |
| Sound Insulation | Yes |
| Grinding Chamber Material | Stainless Steel |
| Frequency | 50 Hz |
| Dimensions | 220 x 220 x mm |
| Voltage | 220-240V |
