What to do if my DentaLaze DL001 Dental equipment laser is not staying on?
If your DentaLaze Dental equipment laser is not staying on, the possible causes are: low battery, bad connection, or a battery that is out of capacity. If there is one or no battery bars, charge the handpiece directly, bypassing the charging stand. Check the connection pins to ensure they are not damaged. If the battery is out-of-capacity, replace it.
Why is my DentaLaze Dental equipment battery not charging?
If the battery for your DentaLaze Dental equipment is not charging, this might be due to broken pins in the charging stand or an electronic defect in the battery assembly. You can bypass, replace, or service the charging stand. Alternatively, replace or service the battery assembly.
How to fix DentaLaze DL001 Dental equipment laser not turning on?
If your DentaLaze Dental equipment laser is not turning on, try pushing any button. You can also charge the Battery Assembly alone by directly plugging the DC Power Plug (bypassing Charging Stand) for 5 hours. If it overheated, wait for it to cool down or direct an air stream at it.
What to do if DentaLaze Dental equipment laser is not cutting?
If your DentaLaze Dental equipment laser is not cutting, try cleaning the laser window with an alcohol-damped mini-Q-tip. If this doesn't solve the problem, contact the manufacturer or your local dealer for service.
General| Brand | DentaLaze |
|---|---|
| Model | DL001 |
| Category | Dental equipment |
| Language | English |
To Next Page
