is an electric toothbrush designed in
Sweden. A product’s appearance is an important part
of the total experience, so every part of the Dentle One
combines elegant simplicity with superior performance
and dependability. The electric toothbrush, the plug and
the charging station cup, have all been designed to be
easy to use and attractive to look at, thus contributing
to healthier teeth and gums, while tting nicely into your
home. This Quick Guide contains simple instructions
about how to use the Dentle One. At dentle.com, you
will nd additional advice and suggestions for how to
best care for your teeth, produced in cooperation with
Swedish dentists. We are pleased that you chose to
purchase a Dentle One, and hope you’ll be very satis-
ed with your new electric toothbrush.
CONTENTS
The Dentle One introduction package contains a
rechargeable electric toothbrush, a brush head, a char-
ging cup (delivered in three parts), a charger adapter
with a cord and docking plug to the charging cup.
Contents
Electric toothbrush
, brush head , on/o button ,
charge indicator
, charging cup (delivered in three
parts)
, charging adapter with cord and docking
plug
.
Technical data
Batteries: 2 x 3/5 AA 600mAh NiMH batteries.
Dimensions: width 30 mm, length 222 mm. Weight:
230 g (electric toothbrush and charger). Adaptor: I/P:
100-240VAC; 50/60Hz; 1,8W; Class II; IPX7 O/P:
26VAC; 120mA. Charging base: 26VAC; Class III; IPX4.
Toothbrush: 2.4V; Class III; IPX7 Input power 1.6W.
SPECIFICATIONS
Oscillates clockwise and counter-clockwise 8,000
times per minute.
Three speed settings: high (8,000 oscillations), low
(7,000 oscillations) and massage (6,000–8,000
oscillations).
Timer function that automatically switches the
brush o after two minutes, and indicates after
30, 60 and 90 seconds that it is time to brush a
dierent area.
Charge lasts up to 14 days when brushing twice a
day for two minutes each time.
Charge initially for 24 hours.
The charging time for the toothbrush depends on
how often you charge it. For the best charging time,
charge your toothbrush every time you use it.
In order to get the best possible results, and thus
healthier teeth and gums, remember to change the
brush head every month.
INSTRUCTIONS
Assembly
The charging cup comes as three parts that are
easy to assemble. The smaller ring part clicks onto
the charging plate. Just attach the larger ring to the
smaller one, and you’ve nished.
Connect the charging adapter to an electric outlet.
Then place your electric toothbrush in the charging
cup, and your Dentle One will start charging.
Your Dentle One electric toothbrush should be
charged for at least 24 hours before using it for the
rst time.
The charging indicator (4) lights up red when the
battery needs charging, ashes green while the
battery is charging, and lights up constantly green
when the battery is fully charged.
Disconnect the charger as soon as the electric
toothbrush is fully charged.
Brushing your teeth
Begin by dipping the brush head into water. Then
squeeze out a bit of toothpaste onto the toothbrush
head.
Avoid splashing by waiting to turn on the tooth-
brush until it is in contact with your teeth.
Brush your teeth for approx. 2 minutes (the timer
function automatically switches the brush o after 2
minutes). Move the brush head from tooth to tooth.
Start with the outside of the teeth, then move on to
the inside and nish up with the chewing surfaces.
The timer function indicates after 30, 60 and 90
seconds that it is time to start brushing a dierent
area of the mouth.
Rinse o the brush head when you are nished,
and let it dry.
Changing the brush head
Remove the old brush head by pulling it straight up.
Attach the new one by pressing it down with the
bristles facing towards you.
It is important to change the brush head once a
month for the best results.
Dismantling the charging cup
It is possible to dismantle the charging cup when
necessary.
Lift o the larger ring from the smaller ring.
Then lift the smaller ring from the charging plate,
and you’re done.
ENGLISH
To Next Page
Loading...