Need help?Do you have a question about the Dentsply Sirona Orthophos SL 2D and is the answer not in the manual?
General| Type | Panoramic X-ray system |
|---|---|
| Technology | 2D imaging |
| Sensor Type | CCD sensor |
| Voltage | 60-90 kV |
| Current | 3-16 mA |
| Focal Spot | 0.5 mm |
| X-ray Generator | High-frequency generator |
| Programs | Standard panoramic, TMJ, Sinus |
| Power Requirements | 230 V AC, 50/60 Hz |
| X-ray Tube | High frequency tube |
Covers general safety, unit notes, ventilation, condensation, and explosion hazards.
Defines operator requirements and critical radiation safety measures.
Provides detailed electrical and mechanical specifications of the unit.
Step-by-step guide for powering on the unit and starting the imaging software.
Covers program selection for panoramic and bitewing X-rays.
Provides general instructions for patient positioning and safety.
Details the process of releasing an exposure and related safety.
Covers regular inspection schedules and maintenance procedures.
Explains the format of error codes and their abbreviations.
To Next Page