To Next PageTo Next Page
Need help?Do you have a question about the Dentsply Sirona Schick 33 and is the answer not in the manual?
General| Brand | Dentsply Sirona |
|---|---|
| Model | Schick 33 |
| Category | Control Unit |
| Language | English |
Inspect device for physical damage or defects before operation.
Use the Sensor and USB Interface strictly according to the guide's recommendations.
Avoid touching exposed connectors on non-medical equipment and the patient simultaneously.
Proper system installation and operation are critical for safe and effective use.
Take precautions against electrostatic discharge to prevent sensor component damage.
Always use protective sheaths for sensors and dispose of them after each patient.
Step-by-step guide for installing the USB driver using the provided disk or download.
Instructions on physically connecting the USB interface to the PC using the USB cable.
Step-by-step guide for powering the system on and off.
Describes Schick 33 sensor sizes, cable lengths, resolution, and features.
Details the USB interface, its connectivity, and LED indicators.
Explains how to acquire high-resolution images with Schick 33 sensors.
Describes Schick Elite sensor sizes, cable lengths, and features.
Instructions for updating the firmware of the USB interface.
Instructions for updating the firmware of the sensor module.
Guides users to the troubleshooting table for sensor or interface problems.
Provides a table of common issues, causes, and corrective actions.
