the unit button (7) or the remote control button (12) repeatedly
until you reach the desired preset number/radio station.
ALARM SETTING
You can set two alarm times. 6 different alarm options are available:
Radio + Light / Radio / Buzzer + Light / Buzzer / Natural sound +
Light / Natural sound.
The setting sequence for AL1 and AL2 is as follows:
In radio off mode, Press the main unit alarm set buttons (12) and (13)
or the remote control buttons (8) and (10) to show the alarm time.
Afterwards keep depress the unit alarm set button (12) and (13) or
the remote control button (8) and (10) over 2 seconds to enter the
alarm set mode. After enter the setting mode, press the unit alarm
set button (12) and (13) to change the mode cycle as follows:
SETTING THE ALARM 1 (BEEPER)
Normal Time→ AL 1 Hour → AL 1 Min → AL 1 weekday Alarm →
AL 1 beeper →Light → Light intensity → Normal Time.
SETTING THE ALARM 1 (RADIO)
Normal Time → AL 1 Hour → AL 1 Minute → AL 1 weekday → AL 1
beeper → AL 1 radio → AL 1 nal radio volume →AL 1 Light → AL 1
Light intensity → Normal Time.
SETTING THE ALARM 1 (NATURAL SOUND)
Normal Time → AL 1 Hour → AL 1 Minute → AL 1 weekday → AL 1
beeper → AL 1 radio →AL 1 natural sound →(Use the unit buttons
(10) and (11) or the remote control buttons (7) and (11) to select the
desired natural sound) →AL 1 nal natural sound volume →AL 1
Light → AL 1 Light intensity → Normal Time
SETTING THE ALARM 2 (BEEPER)
Normal Time→ AL 2 Hour → AL 2 Min → AL 2 weekday Alarm →
AL 2 beeper →Light → Light intensity → Normal Time.
SETTING THE ALARM 2 (RADIO)
Normal Time → AL 2 Hour → AL 2 Minute → AL 2 weekday → AL 2
beeper → AL 2 radio → AL 2 nal radio volume →AL 2 Light → AL 2
Light intensity → Normal Time.
ENG-7
To Next Page
Loading...
