Sound Bar User Manual
Operating Introduction
a.
Place the Soundbar on flat surfaces. Alternatively, you can wall mount the Soundbar with the screws
provided. This Soundbar can be connected to play sound in three different ways:
1. Connect to your Television Headphone Socket
2. Connect to any Bluetooth enabled device
3. Connect to a USB Drive (stick) loaded with music files
b. Cable and external devices connection arrangements:
c. At the right hand side of the Sound Bar are the manual control buttons:
Press /Mode for Power On/Standby.
Hold /Mode to change the mode between: Line In -> Bluetooth -> USB Drive
Press
II
/ MUTE for Pause/Play.
Hold
II
/ MUTE for Mute / No Mute.
USB
LINE IN
DC 12V IN
To Next Page
Need help?
General
