Message: There are some messages to inform user the current condition.
No Signal: STB can't get signal, for example, cable is disconnected.
No Service: Program doesn't have any content to play.
Service Scrambled: Program is scrambled for payment, contact the content
provider to know how to descramble it.
Antenna Overload: The power of antenna is overload.
HDTV not support: This STB doesn't support HDTV. If the program content is
HDTV, STB will display this message.
Locked: Program is locked by setting lock and turning on password setting.
User must input correct password to watch program.
Technical Specification
Power Supply
Input Voltage 110-240V AC 50/60 Hz.
Power Consumption Maximum 5W
Decoder
Video Formats SD,4:3/16:9 Switchable.
Audio Format MPEG Layer I&II,32/44.1/48Khz.
Video Output CVBS ,RGB(default)
Connection
Main Power Cable Fixed Type.
Tuner 1 Antenna Input/1 RF Output.
Scart 1 for TV.
Standby power <1W.
Manual Scan: Manual Scan adds the scanning results into database, it doesn't
erase the database. But User has to know the Frequency and Bandwidth for
scanning. If user scans the same Frequency and Bandwidth more than once, the
programs will be duplicated.
4
To Next Page
Loading...