Why does my Denver Metal Detector sound an irregular tone?
An irregular tone from your Denver Metal Detector can occur for several reasons. First, ensure no other metal detectors are operating nearby. Avoid using it indoors due to the presence of numerous metals. Also, keep away from electromagnetic interference sources like power lines, cables, and electronic fences. Lastly, the ground itself might be heavily magnetized.
How to fix no power on Denver MET-100?
If your Denver Metal Detector has no power, ensure the batteries are installed with the correct polarity. If the issue persists, try replacing the batteries with a new set.
What to do if my Denver Metal Detector is silent and the meter pointer doesn’t move?
If your Denver Metal Detector is silent upon turning on and the meter pointer doesn't move, the balance might have a deviation. To correct this, press the Red Button and adjust the TUNE knob until the detector is in a balanced state.
General| Adjustable Length | Yes |
|---|---|
| Waterproof search coil | Yes |
| 3.5mm headphone jack | Yes |
| Discrimination | Yes |
| Display | LCD |
| Audio Alert | Yes |
| Sensitivity Adjustment | Yes |
| Power Supply | 6 AA batteries |
| Requires | 6 AA batteries |
| Search Coil | 20 cm |
To Next Page
