Denver SCO-80125 - User Manual

Need help?

Do you have a question about the Denver SCO-80125 and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

This document describes the DENVER SCO-80125 Electric Scooter, a personal entertainment device designed for domestic use.

Function Description

The DENVER SCO-80125 Electric Scooter is a personal entertainment device. It is not intended as a means of transport or sports equipment. The scooter is designed for a single user aged 14 years and above, with a maximum weight of 100 kg. It operates safely and quietly under normal conditions.

The scooter features a display with three buttons: a power button, a speed-up button (▲), and a speed-down button (▼). The display shows single mileage (KM), speed, time, gear level, and battery level.

Power On/Off: Long press the power button to turn the display on or off.
Automatic Power Off: The scooter automatically turns off after 5 minutes of idle time.
Display Information: Short press the power button to cycle through TIME, ODO (total mileage), and DIS (driving distance after switching on). TIME and DIS are cleared after power off, while ODO is retained unless manually cleared.
Gear Change: Short press the ▲ or ▼ button to change the gear level (Gear 3 for fast, Gear 2 for medium, Gear 1 for slow speed).
Acceleration: Gently press the accelerator button. The depth of the press is related to the set gear level.
Deceleration: Gently press the deceleration dial. The deeper the press, the greater the deceleration. Pushing too hard can damage the brake dial.
Total Mileage Clear: Press ▲ and ▼ buttons simultaneously, then press the power button to clear the total mileage.
Start Mode (Zero/Non-zero): Press ▲ and ▼ buttons simultaneously, then press the power button and select P3 mode. A parameter value of 0 enables zero start (accelerator works from stationary), while a value of 1 enables non-zero start (manual push-off required before accelerator works). The factory default is non-zero start.
Braking: The scooter has both an electric brake (button) and a mechanical rear brake. Pressing the brake button activates the electric brake. For safety, the rear wheel brake system should be used at high speeds. Pressing both the accelerator and electric brake button simultaneously will automatically brake the scooter.
Lights: The scooter is equipped with a front LED light and a rear LED lamp.
- Front LED Light: Press and hold the ▲ button for 3 seconds to turn it on or off.
- Rear LED Lamp: Powered by 2 AA batteries (not included). It can be detached, opened with a coin, and batteries loaded according to polarity. Press "PUSH" to cycle through flash, constant light, and off modes.

Important Technical Specifications

Model: SCO-80125
Dimensions:
- Folding size: 980 x 152 x 370 mm
- Unfolded size: 1080 x 425 x 980 mm
Weight: 10.58 kg
Max Load: 100 kg
Age Requirement: 14+ years
Max Speed: 20 km/h (horizontal riding)
Distance (Range): Up to 12 km
Terrain: Level and dry surface
Battery Type: Li-ion battery
Battery Nominal Voltage: 36 V
Battery Input Voltage: 42 V
Battery Capacity: 4000 mAH
Motor Power: 250 W
Power Consumption: ≤ 250 W
Emission Sound Pressure Level: < 70 dB (A)
Power Adapter: XHK-970-42020
- Rated Input Voltage: 100-240 V~, 50/60 Hz, 2.5 A (Max)
- Rated Output Voltage: 42 V
- Rated Current: 2 A
Charging Time: 3 hours
Operating Temperature: -10°C to +45°C
Storage Temperature: 0°C to 35°C (optimum 25°C)
Year of Manufacture: 2019

Usage Features

Unfolding: Position the scooter on its wheels, push the security lock up, pull the red unlock clasp, and slowly raise the handle until it clicks into place.
Folding: Push the security lock up, pull the red unlock clasp, and press the front tube downward until it clicks into place.
Handlebar Assembly: The packaging includes two handlebars. The display angle can be adjusted by loosening a screw on the handlebar, rotating the axle and display screen inwards, then retightening. Before riding, ensure handlebar grips are secure and all components are fully functional.
Charging: Connect the supplied power adapter to the charging port. The charger LED lights red during charging and green when fully charged. Do not overcharge (max 3 hours). Charge in temperatures between 0°C and 45°C.
Safe Riding:
- Always wear a helmet and protective gear (elbow, knee, wrist protectors).
- Ride only on dry surfaces. Avoid wet conditions, steep slopes, obstacles, snow, ice, slippery surfaces, textiles, small branches, and stones.
- Maintain a safe speed allowing for safe braking.
- Keep a sufficient distance from others to avoid collisions.
- Do not ride under the influence of alcohol or other substances.
- Ensure clear vision ahead.
- Feet must always be on the footboard.
- Do not carry objects while riding.
- Do not start or stop abruptly.
- Stop riding if the "Low Battery Warning" appears and use the rear brake to stop safely.
- If the scooter switches off, the system blocks the vehicle automatically; it can be released by pressing On/Off.
- The scooter is for domestic use only and not for public roads or traffic.
- Do not jump on or off the scooter; "trick riding" is not covered by warranty and carries a risk of injury.
Parking: Get off the scooter and press the side stand down with your right foot to support it. Push the side stand back up before riding.
Transportation: Pack the scooter flat. Do not drop it or place it near fire or explosive materials.

Maintenance Features

Storage and Cleaning:
- Clean with a damp cloth (stiff brush for heavy dirt, then damp cloth). Toothpaste can be used for stubborn dirt.
- Keep the scooter turned off and cover the charging input during cleaning.
- Do not use alcohol, gas, kerosene, or other corrosive/volatile chemical solvents. Do not use pressurized water-gun or running water.
- Store in a dry, cool environment. Avoid leaving outdoors or exposing to direct sun for long periods.
Battery Maintenance:
- Avoid temperatures above 50°C or below -10°C.
- Keep away from open flames or heat sources.
- Avoid draining batteries 100%; charge while some power remains to extend battery life.
- Battery performance may be reduced in cold or very hot areas, which is normal.
- Charge at regular intervals, even if not in use, to prevent damage from low voltage.
- Fully discharged batteries can lose power in 90-120 days in off mode; partially charged batteries lose power faster.
- Charge before batteries are 100% out of power to avoid cell damage (not covered by warranty).
- Do not disassemble the battery package; this must be handled by official service repair centers.
Bearings: The scooter has sealed, dustproof bearings requiring no lubrication. Check for wear regularly to avoid unsafe riding. Avoid excessive force or jumping to prevent damage.
Wheels: Check for wear regularly.
Brake: The brake pad is metal. Check for wear regularly. Do not apply excessive force to prevent damage. Avoid constant braking to prevent tire wear and overheating.
Screws and Fasteners: Ensure all screws are properly tightened.
Steering System: Check that the steering system is correctly adjusted, and all connection components are firmly secured and not broken before riding.
Modifications: All parts and materials of the electric scooter cannot be changed; modifications are not allowed.