Need help?Do you have a question about the Denver SHO-110 and is the answer not in the manual?
General| Management software | DENVER SMART HOME |
|---|---|
| Web-based management | Yes |
| AC input voltage | 230 V |
| Power source type | AC, DC |
| AC input frequency | 50 Hz |
| Built-in HDD | No |
| Compatible memory cards | MicroSD (TransFlash) |
| Maximum memory card size | 128 GB |
| Sensor type | CMOS |
| Number of sensors | 1 |
| Number of lenses | - |
| Total megapixels | 1 MP |
| Maximum resolution | 1280 x 720 pixels |
| Form factor | Bullet |
| Mounting type | Wall |
| Product color | White |
| Housing material | Metal |
| International Protection (IP) code | IP65 |
| Night vision distance | 30 m |
| Type | IP security camera |
| Placement supported | Indoor |
| Connectivity technology | Wired & Wireless |
| Minimum illumination | - lx |
Weight and Dimensions| Depth | 58 mm |
|---|---|
| Width | 189 mm |
| Height | 90 mm |
| Package depth | 118 mm |
| Package width | 220 mm |
| Package height | 89 mm |
| Package weight | 580 g |
Download and install the DENVER SMART HOME app from App Store or Google Play for camera setup.
Create an account using your mobile number or email and a verification code.
Connect the device to power, insert a Micro SD card, and use the reset pin.
Use the camera's QR code to add it to the app by scanning it.
Use smart configuration to add the camera to the app without a QR code.
Share camera access with family/friends via the app's Home Management feature.
Wireless range depends on Wi-Fi router and room conditions. Check router specs.
Ensure Wi-Fi router is online and app is updated for connectivity.
Verify Wi-Fi password, check internet connection, and ensure a strong Wi-Fi signal.
The app supports unlimited devices; router may limit connections.
Proper disposal of electronic equipment using designated collection points.
Details compliance with Directive 2014/53/EU for radio equipment.
Operating Frequency Range: 50/60Hz, Max Output Power: 6W.
To Next Page
