Denver VDB-216 - Connecting Doorbell to App

ENG 8
Connecting your video doorbell with the App.
3
.
Power on the device
and make sure the
indicator is flashing
quickly or a prompt
tone is heard.
4. Select the “QR Code”
pairing mode, then tap
“Next”. Then select a
2.4GHz Wi-Fi network
and input the
password to continue.
1.
After installing the app
“Denver Smart home”,
launch the app and
follow the prompts to set
up the app.
2. Tap “+” or “Add Device”
from the home page,
then choose “Smart
camera”.
Note: Your doorbell
functions only on a
2.4GHz Wi-Fi network.
For setup, please make
sure your smartphone or
tablet device is
connected to a 2.4GHz
Wi-Fi network.