Need help?Do you have a question about the Denver WCS-5020 and is the answer not in the manual?
General| Time lapse mode | Yes |
|---|---|
| Maximum frame rate | - fps |
| Supported video modes | 1080p |
| Maximum video resolution | 1920 x 1080 pixels |
| Sensor type | CMOS |
| Total megapixels | 5 MP |
| Maximum image resolution | 4000 x 3000 pixels |
| Languages support | CHI (SIMPL), DAN, DEU, DUT, ENG, ESP, FIN, ITA, JPN, POR, SWE |
| Flip-out screen | - |
| Display diagonal | 2 \ |
| Package depth | 84 mm |
| Package width | 155 mm |
| Package height | 111 mm |
| Package weight | 330 g |
| Storage media | Memory card |
| Compatible memory cards | MicroSD (TransFlash) |
| Maximum memory card size | 32 GB |
| Wi-Fi | No |
| Product color | Camouflage |
| Country of origin | China |
| International Protection (IP) code | IP65 |
| Battery type | AA |
| Battery voltage | 1.5 V |
| Battery life (max) | - h |
| Battery technology | Alkaline |
| Number of batteries supported | 4 |
| USB 2.0 ports quantity | 1 |
| Cables included | USB |
| Pallet height | 1730 mm |
| Pallet length | 1200 mm |
| Quantity per pallet | 520 pc(s) |
| Master (outer) case width | 285 mm |
| Quantity per pallet layer | 52 pc(s) |
| Master (outer) case height | 160 mm |
| Master (outer) case length | 230 mm |
| Master (outer) case weight | 1630 g |
| Number of layers per pallet | 10 pc(s) |
| Quantity per master (outer) case | 4 pc(s) |
| Maximum number of stacking cartons | 6 pc(s) |
| Pallet weight | 211000 g |
| Pallet net width | 800 mm |
| Pallet net weight | 196000 g |
| Master (outer) case GTIN (EAN/UPC) | 5706751046674 |
Weight and Dimensions| Depth | 43 mm |
|---|---|
| Width | 104 mm |
| Height | 75 mm |
| Weight | 176 g |
The camera's display screen for viewing menus and captured media.
Infrared light emitting diodes for night vision capabilities.
The optical component for capturing images and videos.
Button used for navigation or switching to video mode.
Button for navigation or capturing photos.
Detects movement to trigger camera recording or photo capture.
Button to confirm selections or take a photo.
Button to access and navigate the camera's settings menu.
Button for navigating options to the right or adjusting values.
Button to enter the playback mode for reviewing media.
Port for connecting an external DC power adapter.
Mounting point for attaching the camera to a tripod.
Slot for inserting a Micro SD card for data storage.
Housing for installing the camera's power source batteries.
Switch to control the camera's power state (On, Test, Off).
Port for connecting the camera to a computer via USB.
Prepare, insert, and format a Micro SD card for saving files. Use high-speed cards.
Advice on protecting the memory card from damage and environmental factors.
Instructions on how to switch the camera between on, test, and off modes.
Configure the camera to take photos, videos, or both.
Adjust the image quality for still photos.
Set the number of continuous shots taken in photo mode.
Determine the quality and storage duration for video recordings.
Set the resolution for time-lapse videos.
Configure the duration for video clips.
Enable or disable audio recording during video capture.
Set the delay time after motion detection before recording.
Configure the range for infrared motion detection.
Adjust sensor sensitivity based on environmental conditions.
Set specific start and stop times for camera operation.
Configure automatic picture taking at intervals for time-lapse.
Convert a series of time-lapse photos into a video.
Disable the time-lapse photography feature.
Choose the display language for the camera interface.
Enable or disable continuous video recording in a loop.
Choose whether to embed date and time information on photos.
Enable or disable a four-digit password for camera security.
Instructions for switching to photo mode and capturing an image.
Steps to switch to video mode and start/stop recording.
Navigating and playing back recorded photos and videos.
Options for managing recorded files like deleting and write protection.
Notice regarding potential product changes and manual errors.
Information about copyright, manufacturer details, and website.
Indicates compliance with European Union safety standards.
Symbol indicating proper disposal of electronic waste.
Information on hazardous materials in equipment and batteries.
Guidance on disposing of electronic waste and batteries separately.
Importance of submitting used batteries for recycling.
Information on where to submit used electric and electronic equipment.
Statement of compliance with EU directives for radio equipment.
Declares compliance of WCS-5020 with Directive 2014/53/EU.
Contact information for DENVER ELECTRONICS A/S.
Official website and social media for Denver Electronics.
To Next Page
